Notch Fatigue Property of 7050-T7451 Aluminum Alloy under Bending Resonance Environment

被引:0
作者
He, Dingni [1 ]
Cui, Wei [1 ]
Liao, Yunfei [2 ]
Zhang, Jianbo [2 ]
机构
[1] China Helicopter Res & Dev Inst, Jingdezhen 333001, Peoples R China
[2] Shanghai Aeronaut Mat & Struct Testing Co Ltd, Shanghai 201318, Peoples R China
来源
MECHANIKA | 2024年 / 30卷 / 01期
关键词
notch fatigue property; bending resonance; conventional fatigue; 7050-T7451 aluminum alloy; LIFE; COMPONENTS; BEHAVIOR; SIZE;
D O I
10.5755/j02.mech.33709
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
Based on the electromagnetic shaker table, the resonant fatigue testing system and the corresponding conventional fatigue testing system were designed respectively. The fatigue life (S-N) curves of smooth and notched 7050-T7451 aluminum alloy specimens were measured in the range of 10(5)-10(7) cycles, and the notch fatigue property of 7050-T7451 aluminum alloy under bending resonance environment was studied. The results indicate that the fracture mechanism under bending resonant fatigue environment is roughly the same as that under bending conventional fatigue loading. All the S-N curves obtained through resonant and conventional fatigue tests show a continuously downward trend, and there are no obvious fatigue limits. Notch fatigue property under bending resonance environment presents "stage characteristics", which increases first and then decreases with the increase of cycles. There is a critical cycle number N-c at 8x10(5) cycles, corresponding to the maximum fatigue notch factor Kf-max (or the maximum notch sensitivity factor q(max)). There are two critical cycles N-1 and N-2. When N-1<N<N-2, the notch fatigue property of the material and the corresponding structures under resonance environment requires more consideration than conventional fatigue loading.
引用
收藏
页码:14 / 22
页数:9
相关论文
共 32 条
[1]  
[Anonymous], 1984, HB 5277-84
[2]  
Bader Q.H., 2014, International Journal of Engineering Research and Applications, V4, P39
[3]   Effect of nugget size and notch geometry on the high cycle fatigue performance of resistance spot welded DP590 steel sheets [J].
Banerjee, P. ;
Sarkar, R. ;
Pal, T. K. ;
Shome, M. .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2016, 238 :226-243
[4]  
Bednarz A., 2019, Journal of KONES, V26, P7, DOI DOI 10.2478/KONES-2019-0026
[5]   Common failures in gas turbine blades [J].
Carter, TJ .
ENGINEERING FAILURE ANALYSIS, 2005, 12 (02) :237-247
[6]   Fatigue analysis of crankshaft sections under bending with consideration of residual stresses [J].
Chien, WY ;
Pan, J ;
Close, D ;
Ho, S .
INTERNATIONAL JOURNAL OF FATIGUE, 2005, 27 (01) :1-19
[7]  
Daemi N., 2011, World Academy of Science, Engineering and Technology, V5, P08
[8]  
Dieter G.E., 1986, MECH METALLURGY
[9]   Fatigue behavior and life predictions of notched specimens made of QT and forged microalloyed steels [J].
Fatemi, A ;
Zeng, Z ;
Plaseied, A .
INTERNATIONAL JOURNAL OF FATIGUE, 2004, 26 (06) :663-672
[10]   Fatigue stress concentration and notch sensitivity in nanocrystalline metals [J].
Furnish, Timothy A. ;
Boyce, Brad L. ;
Sharon, John A. ;
O'Brien, Christopher J. ;
Clark, Blythe G. ;
Arrington, Christian L. ;
Pillars, Jamin R. .
JOURNAL OF MATERIALS RESEARCH, 2016, 31 (06) :740-752