PHYSICAL MODELLING OF ALUMINUM MELT DEGASSING IN LOW-PRESSURE DIE CASTING CONDITIONS

被引：0

作者：

Socha, Ladislav ^{[1
]}

Prasil, Tomas ^{[2
,3
]}

Gryc, Karel ^{[1
]}

Svizelova, Jana ^{[1
]}

Novacek, Petr ^{[3
]}

机构：

[1] Inst Technol & Business Ceske Budejovice, Ceske Budejovice, Czech Republic

[2] Univ West Bohemia, Plzen, Czech Republic

[3] MOTOR JIKOV Slevarna As, Die Casting Div, Ceske Budejovice, Czech Republic

来源：

31ST INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, METAL 2022 | 2022年

关键词：

Physical modelling; aluminum; refinement process; FDU; low pressure die casting;

D O I：

10.37904/metal.2022.4511

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

This paper deals with approximate physical modelling of aluminum melt degassing, performed under low-pressure die casting conditions of aluminum castings. The modelling took place on an aquatic physical model on a 1:1 scale to the operating conditions, constructed in the laboratories of ITB in CB. Tested parameters were defined based on operating conditions (rotation speed and inert gas flow). Various combinations of these parameters created 20 tested variants, including the current set of parameters used in operating conditions. The effects of the tested parameters were determined using the results of measurement. Increasing the rotation speed and the inert gas flow accelerates gas removal from the model liquid. It will be possible to further use this knowledge in refining technology optimization in the low-pressure aluminum die casting.

引用

页码：785 / 791

页数：7

共 14 条

[1] Mass Transfer Study of a Batch Aluminum Degassing Ladle with Multiple Designs of Rotating Impellers [J].

Abreu-Lopez, Diego ;

Dutta, Abhishek ;

Luis Camacho-Martinez, Jose ;

Trapaga-Martinez, Gerardo ;

Ramirez-Argaez, Marco A. .

JOM, 2018, 70 (12) :2958-2967

[2]

[Anonymous], 2007, Aluminium Materials and Technologies from A to Z

[3] Iron reduction in aluminum by electroslag refining [J].

Chen Chong ;

Wang Jun ;

Shu Da ;

Xue Jing ;

Sun Bao-de ;

Xue Yong-sheng ;

Yan Qing-min .

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2012, 22 (04) :964-969

[4] REFINING ALUMINIUM-ALLOY MELTS WITH GRAPHITE ROTORS [J].

Lichy, Petr ;

Bajerova, Marketa ;

Kroupova, Ivana ;

Obzina, Tomas .

MATERIALI IN TEHNOLOGIJE, 2020, 54 (02) :263-265

[5] Physical Modelling of an Aluminium Degassing Operation with Rotating ImpellersA Comparative Hydrodynamic Analysis [J].

Luis Camacho-Martinez, Jose ;

Ramirez-Argaez, Marco A. ;

Zenit-Camacho, Roberto ;

Juarez-Hernandez, Arturo ;

Oscar Barceinas-Sanchez, J. D. ;

Trapaga-Martinez, Gerardo .

MATERIALS AND MANUFACTURING PROCESSES, 2010, 25 (07) :581-591

[6] Experimental measurements of bubble size distributions in a water model and its influence on the aluminum kinetics degassing [J].

Mancilla, Ernesto ;

Cruz-Mendez, Wiener ;

Aurelio Ramirez-Argaez, Marco ;

Gonzalez-Rivera, Carlos ;

Ascanio, Gabriel .

CANADIAN JOURNAL OF CHEMICAL ENGINEERING, 2019, 97 (S1) :1729-1740

[7]

Saternus M, 2010, ARCH METALL MATER, V55, P463

[8] Physical Modeling of the Impeller Construction Impact on the Aluminum Refining Process [J].

Saternus, Mariola ;

Merder, Tomasz .

MATERIALS, 2022, 15 (02)

[9] Physical Modelling of Aluminum Refining Process Conducted in Batch Reactor with Rotary Impeller [J].

Saternus, Mariola ;

Merder, Tomasz .

METALS, 2018, 8 (09)

[10]

Sigworth G., 2013, ESSENT READ LIGHT ME, V3, P65, DOI [10.1002/9781118647783.ch9, DOI 10.1002/9781118647783.CH9]

← 1 2 →