Reversing relaxation-induced embrittlement by high-temperature thermal cyclic annealing in Zr-based metallic glass

Annealing usually induces structural relaxation and reduction of liquid -like regions, leading to embrittlement in bulk metallic glasses (BMGs). Here, we find that the short-term high -temperature thermal cycling (HTC) annealed Zr 41.2 Ti 13.8 Cu 12.5 Ni 10 Be 22.5 (Vit1) BMG shows an improved plasticity without sacrificing their yield strength. And only relaxation behavior with increased hardness is observed after HTC, which is different from the rejuvenation effect usually observed in cryogenic thermal cycling (CTC). We revealed that this embrittlement reversal is attributed to enhanced fluctuations of full width at half maximum (FWHM) of the hardness ' distribution at micrometer and larger scales induced by short-term HTC. The enhanced fluctuations of mechanical heterogeneities across the diameter on a cross-section of the short-term HTC sample may increase the number and decrease the size of shear transformation zones (STZs) activated at high stress and promote the deflection of shear bands (SBs) during their propagation to form multiple SBs. The enhanced plasticity after HTC induced relaxation contradicts the common sense that relaxation accompanying with annihilation of free volume or liquid -like region usually causes embrittlement. Present results indicate that short-term HTC could be a powerful mean to tune the mechanical performance, shedding new lights on the interplay among relaxation, mechanical/ structural heterogeneity, and plasticity of MGs.