Strain rate and temperature rate behavior of ultra-high-strength 1770 steel: Base for transverse impact analysis

The investigation was motivated by the widespread use of ultra -high -strength steels in cable -stayed bridges and armor steel plates. These structures are exposed to elevated risks from extreme loads, including vehicle impacts and blast loadings. The study aimed to investigate the mechanical properties of 1770 steel for applications in extreme conditions. The strain rates and temperatures ranged from 0.00095 s -1 to 1303 s -1 and 20 degrees C -900 degrees C, respectively. Tensile tests were conducted at various strain rates using a Split Hopkinson Tension Bar for dynamic testing and a universal testing machine for quasi -static testing at room temperature (20 degrees C). Quasi -static tension at elevated temperatures was carried out using an electromechanical testing machine coupled with a heating device. A uniform temperature distribution inside the specimens was ensured by a 30 -min holding time. The results of the tensile test indicate that the 1770 steel displays notable thermal softening effects and strain rate hardening that differ from mild steel. The standard Johnson -Cook (J -C) model was found to be inadequate in accurately predicting the strain rate effects of this specimen. To address this issue, the strain rate parameter C in the standard model was adjusted to create the modified J -C model, which demonstrated good agreement with the experimental results. To further demonstrate the modified model and the identified parameters, drop hammer impact tests and corresponding numerical simulations were conducted. The impact test and numerical simulation results showed good agreement in terms of deformation and contact force. The mechanical properties and the constitutive models can serve as a design reference for the ultra -high -strength 1770 steel in extreme envirnments, as well as a theoretical basis for fitting material models of similar ultra -high -strength steels.