Achieving high volumetric energy density in graphite anodes through polymer coating with improved electrolyte impregnation

被引:0
|
作者
Kim, Jueun [1 ]
Jayasubramaniyan, S. [2 ]
Kim, Seokjin [1 ]
Kim, Donghwi [3 ]
Ko, Minseok [1 ]
Reddy, N. S. [3 ]
Cho, Kwon-Koo [1 ,2 ]
Cho, Yoon-Gyo [4 ]
Nam, Sang Yong [1 ,2 ]
Cho, Woongrae [5 ]
Sung, Jaekyung [1 ,3 ]
机构
[1] Gyeongsang Natl Univ, Dept Mat Engn & Convergence Technol, Jinju 52828, South Korea
[2] Gyeongsang Natl Univ, Res Inst Green Energy Convergence Technol, Jinju 52828, South Korea
[3] Gyeongsang Natl Univ, Sch Mat Sci & Engn, Engn Res Inst, Jinju 52828, South Korea
[4] Ulsan Natl Inst Sci Technol, Sch Energy & Chem Engn, UNIST Gil 50, Ulsan 44919, South Korea
[5] SK Innovat, Anal Solut Ctr, Daejeon, South Korea
基金
新加坡国家研究基金会;
关键词
ION; PERFORMANCE; CHALLENGES; MECHANISM;
D O I
10.1039/d4ta03017f
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
The increasing demand for electric vehicles (EVs) has prompted extensive research in the development of lithium-ion batteries (LIBs) with high volumetric energy density. The graphite anode possesses a tap density of 2.25 g cc-1, resulting in a volumetric energy density of over 770 W h L-1. However, the practical electrode density of 1.4-1.6 g cc-1 leads to a lower volumetric energy density of similar to 550 W h L-1, and increasing electrode density beyond 1.6 g cc-1 is limited owing to the pore closure and poor electrolyte penetration, which leads to an imbalance in the N/P ratio resulting in Li metal plating. Hence, enhancing the electrolyte permeation into the densely packed graphite electrode is the crucial aspect for achieving high volumetric energy density. In this research, we coated a functional polymer (cyanoethyl polyvinyl alcohol), which has a high electrolyte absorption capability on a conventional graphite anode to enhance the electrolyte penetration into the highly densified graphite. As a result, the electrode demonstrated a high cycle stability under a high electrode density of 1.9 g cc-1 without any Li plating, and drastic degradation of capacity retention resulted in a remarkable volumetric energy density exceeding 650 W h L-1. The increasing demand for electric vehicles (EVs) has prompted extensive research in the development of lithium-ion batteries (LIBs) with high volumetric energy density.
引用
收藏
页码:22201 / 22209
页数:9
相关论文
共 50 条
  • [1] High Energy Density Calendered Si Alloy/Graphite Anodes
    Du, Zhijia
    Dunlap, R. A.
    Obrovac, M. N.
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2014, 161 (10) : A1698 - A1705
  • [2] Si alloy/graphite coating design as anode for Li-ion batteries with high volumetric energy density
    Du, Zhijia
    Li, Jianlin
    Daniel, C.
    Wood, D. L., III
    ELECTROCHIMICA ACTA, 2017, 254 : 123 - 129
  • [3] Boosting the Energy Density Through In Situ Thermal Gelation of Polymer Electrolyte with Lithium-Graphite Composite Anode
    Kang, Chea-Yun
    Lee, Rae-Hyun
    Lee, Jong-Kyu
    Kim, Kyong-Nam
    Yoon, Jung-Rag
    Lee, Seung-Hwan
    ENERGY & ENVIRONMENTAL MATERIALS, 2025,
  • [4] High-energy density graphite/AC capacitor in organic electrolyte
    Khomenko, V.
    Raymundo-Pinero, E.
    Beguin, F.
    JOURNAL OF POWER SOURCES, 2008, 177 (02) : 643 - 651
  • [5] Graphite oxide/polypyrrole composite electrodes for achieving high energy density supercapacitors
    Arvinder Singh
    Amreesh Chandra
    Journal of Applied Electrochemistry, 2013, 43 : 773 - 782
  • [6] Graphite oxide/polypyrrole composite electrodes for achieving high energy density supercapacitors
    Singh, Arvinder
    Chandra, Amreesh
    JOURNAL OF APPLIED ELECTROCHEMISTRY, 2013, 43 (08) : 773 - 782
  • [7] Hydrogel-Polymer Electrolyte for Electrochemical Capacitors with High Volumetric Energy and Life Span
    Gajewski, Piotr
    Beguin, Francois
    CHEMSUSCHEM, 2020, 13 (07) : 1876 - 1881
  • [8] Polymer-based materials for achieving high energy density film capacitors
    Fan, Benhui
    Zhou, Mingyu
    Zhang, Chong
    He, Delong
    Bai, Jinbo
    PROGRESS IN POLYMER SCIENCE, 2019, 97
  • [9] High energy density anodes using hybrid Li intercalation and plating mechanisms on natural graphite
    Son, Yeonguk
    Lee, Taeyong
    Wen, Bo
    Ma, Jiyoung
    Jo, Changshin
    Cho, Yoon-Gyo
    Boies, Adam
    Cho, Jaephil
    De Volder, Michael
    ENERGY & ENVIRONMENTAL SCIENCE, 2020, 13 (10) : 3723 - 3731
  • [10] Achieving high energy density for lithium-ion battery anodes by Si/C nanostructure design
    Lv, Xingshuai
    Wei, Wei
    Huang, Baibiao
    Dai, Ying
    JOURNAL OF MATERIALS CHEMISTRY A, 2019, 7 (05) : 2165 - 2171