Creep cavities and carbide evolution in interrupted creep conditions along P91 steel of dissimilar weld joint

被引：1
作者：
Awale, Deepshree D. [1 ]
Dandekar, Tushar R. [2 ]
Ballal, Atul R. [3 ]
Thawre, Manjusha M. [3 ]
机构：
[1] IITB, Dept Met Engn & Mat Sci, Mumbai, India
[2] Univ Portsmouth, Sch Mech & Design Engn, Portsmouth, England
[3] VNIT, Dept Met & Mat Engn, Nagpur, India
来源：
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY | 2024年 / 38卷 / 23期
关键词：
P91; steel; dissimilar weld; creep cavities; M23C6; interrupted creep test; 9CR-1MO STEEL; MICROSTRUCTURE; BEHAVIOR; IRRADIATION; MECHANISM;
D O I：
10.1080/01694243.2024.2368826
中图分类号：
TQ [化学工业];
学科分类号：
0817 ;
摘要：
The creep behaviour of dissimilar weld joint of 316LN SS-P91 steel when subjected to lower applied stresses (below 100 MPa) generally fails in a Type-IV pattern. The dissimilar weld joint was welded through shielded metal arc welding (SMAW) process with INCONEL as electrode, a nickel-based superalloy. An interrupted creep test was carried out at creep condition of 80 MPa -600 degrees C temperature. Interruption was done at two stages of creep, i.e. (a) mid of secondary and (b) start of tertiary. Microstructural evolution with respect to the hardness variation along various regions of P91 steel at interrupted and the failed specimen was done. A coarsening of hierarchical boundaries and M23C6 carbides was observed along HAZ region that has resulted with respect to time and temperature.
引用
收藏
页码：4190 / 4201
页数：12
相关论文
共 33 条
[1]   Precipitate design for creep strengthening of 9% Cr tempered martensitic steel for ultra-supercritical power plants [J].
Abe, Fujio .
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS, 2008, 9 (01)
[2]   Study on effect of grain refinement of P92 steel base plate on mechanical and microstructural features of the welded joint [J].
Adhithan, Balamurugan ;
Pandey, Chandan .
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2021, 192
[3]   Microstructure and mechanical properties of stainless steel clad plate joints produced by TIG and MAG hybrid welding [J].
An, Q. ;
Fan, K. Y. ;
Ge, Y. F. ;
Liu, B. X. ;
Liu, Y. C. ;
Wang, S. ;
Chen, C. X. ;
Ji, P. G. ;
Yin, F. X. .
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2020, 34 (06) :670-685
[4]  
Awale Deepshree D., 2020, Journal of Nuclear Materials, V532, P168, DOI [10.1016/j.jnucmat.2020.152048, 10.1016/j.jnucmat.2020.152048]
[5]   Evaluation of tensile properties of various regions of creep exposed dissimilar weld joint using miniature specimen testing [J].
Awale, Deepshree D. ;
Vijayanand, V. D. ;
Ballal, Atul R. ;
Thawre, Manjusha M. ;
Kumar, J. Ganesh ;
Reddy, G. V. Prasad .
ENGINEERING FAILURE ANALYSIS, 2021, 120
[6]   Microstructural analysis on creep properties of dissimilar materials joints between T92 martensitic and HR3C austenitic steels [J].
Cao, Jian ;
Gong, Yi ;
Yang, Zhen-Guo .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (19-20) :6103-6111
[7]   Effects of aging temperature on microstructural evolution at dissimilar metal weld interfaces [J].
Choi, Kyoung Joon ;
Yoo, Seung Chang ;
Kim, Taeho ;
Bahn, Chi Bum ;
Kim, Ji Hyun .
JOURNAL OF NUCLEAR MATERIALS, 2015, 462 :54-63
[8]   Creep rupture study of dissimilar welded joints of P92 and 304L steels [J].
Dak, Gaurav ;
Guguloth, Krishna ;
Vidyarthy, R. S. ;
Fydrych, Dariusz ;
Pandey, Chandan .
WELDING IN THE WORLD, 2024, 68 (11) :2995-3018
[9]   Microstructure and mechanical behaviour study of the dissimilar weldment of 'IN82 buttered' P92 steel and AISI 304L steel for ultra super critical power plants [J].
Dak, Gaurav ;
Singh, Vivek ;
Kumar, Amit ;
Sirohi, Sachin ;
Bhattacharyya, Abir ;
Pandey, Chandan ;
Pandey, Shailesh M. .
MATERIALS TODAY COMMUNICATIONS, 2023, 37
[10]   Microstructural characterization of dissimilar welds between alloy 800 and HP heat-resistant steel [J].
Dehmolaei, R. ;
Shamanian, M. ;
Kermanpur, A. .
MATERIALS CHARACTERIZATION, 2008, 59 (10) :1447-1454
1234