Effect of Trenched Hemispherical Pin Fins on Cooling Performance of Heat Sink

被引:2
作者
Yousfi, Aissa [1 ]
Bellahcene, Lahcene [2 ]
Alqurashi, Faris [3 ]
Sahel, Djamel [4 ]
Teggar, Mohamed [2 ]
Laouer, Abdelghani [5 ]
Arici, Muslum [6 ]
Kchaou, Mohamed [3 ]
机构
[1] Univ Amar Telidji, LEDMSD, Laghouat 03000, Algeria
[2] Univ Amar Telidji, LMe, Laghouat 03000, Algeria
[3] Univ Bisha, Coll Engn, Dept Mech Engn, POB 001, Bisha, Saudi Arabia
[4] UST Oran MB, LCGE Lab, Oran 31000, Algeria
[5] Univ Jijel, Fac Exact Sci & Comp Sci, LPMCN Lab, Jijel 18000, Algeria
[6] Kocaeli Univ, Engn Fac, Mech Engn Dept, Kocaeli, Turkiye
关键词
cooling; heat sink; trench; hemispherical; pin fin; performance analysis; TRANSFER ENHANCEMENT; THERMAL PERFORMANCE; ARRAY; ELECTRONICS;
D O I
10.12913/22998624/185505
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Pin fins have the potential to improve the thermal performance of various engineering devices. Modified pin fins could further increase their thermal performance in a passive way at lower cost. This study is aimed at numerically investigating the thermal performance of trenched hemispherical pin fins heat sink (THPFHS) and the influence of parameters including the trench number (N = 1, 3 and 5) and thickness (e = 1 to 5 mm). The simulations were performed using a computational fluid dynamics (CFD) software considering turbulent air flow conditions. Results showed that the use of aluminum fins fitted with one trench in the middle of the hemispherical pin fin considerably increased the local heat transfer. Furthermore, all studied configurations show high thermal performance factor (HTPF) compared with the conventional cylindrical pin fins heat sink (CPFHS). For this new configuration (THPFHS), Nu increases by 45% while the thermal resistance reduces by 42%, compared to the baseline case. On the other hand, this improved performance results in 50% pressure drop penalty. Moreover, the obtained results showed a significant improvement in the performance mainly at high Re.
引用
收藏
页码:33 / 44
页数:12
相关论文
共 32 条
[1]   A comparative experimental thermal performance analysis of conical pin fin heat sink with staggered and modified staggered layout under forced convection [J].
Abuska, Mesut ;
corumlu, Vahit .
THERMAL SCIENCE AND ENGINEERING PROGRESS, 2023, 37
[2]   Thermal management of electronics: An experimental analysis of triangular, rectangular and circular pin-fin heat sinks for various PCMs [J].
Ali, Hafiz Muhammad ;
Ashraf, Muhammad Junaid ;
Giovannelli, Ambra ;
Irfan, Muhammad ;
Bin Irshad, Talal ;
Hamid, Hafiz Muhammad ;
Hassan, Faisal ;
Arshad, Adeel .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2018, 123 :272-284
[3]   Experimental investigation of n-eicosane based circular pin-fin heat sinks for passive cooling of electronic devices [J].
Ali, Hafiz Muhammad ;
Arshad, Adeel .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2017, 112 :649-661
[4]   Thermal performance of phase change material (PCM) based pin-finned heat sinks for electronics devices: Effect of pin thickness and PCM volume fraction [J].
Arshad, Adeel ;
Ali, Hafiz Muhammad ;
Ali, Muzaffar ;
Manzoor, Shehryar .
APPLIED THERMAL ENGINEERING, 2017, 112 :143-155
[5]   Numerical study of graphene-platinum hybrid nanofluid in microchannel for electronics cooling [J].
Avinash Kumar, R. ;
Kavitha, M. ;
Manoj Kumar, P. ;
Arvindh Seshadri, S. .
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2021, 235 (21) :5845-5857
[6]   Hydrothermal performance of inline and staggered arrangements of airfoil shaped pin-fin heat sinks: A comparative study [J].
Babar, Hamza ;
Wu, Hongwei ;
Ali, Hafiz Muhammad ;
Zhang, Wenbin .
THERMAL SCIENCE AND ENGINEERING PROGRESS, 2023, 37
[7]   Thermal optimization of PCM based pin fin heat sinks: An experimental study [J].
Baby, Rajesh ;
Balaji, C. .
APPLIED THERMAL ENGINEERING, 2013, 54 (01) :65-77
[8]   Heat transfer and friction correlations and thermal performance analysis for a finned surface [J].
Bilen, K ;
Akyol, U ;
Yapici, S .
ENERGY CONVERSION AND MANAGEMENT, 2001, 42 (09) :1071-1083
[9]   Forced convective heat transfer enhancement with perforated pin fins [J].
Chin, Swee-Boon ;
Foo, Ji-Jinn ;
Lai, Yin-Ling ;
Yong, Terry Kin-Keong .
HEAT AND MASS TRANSFER, 2013, 49 (10) :1447-1458
[10]  
COMSOL Multiphysics, 2016, CFD Module User's Guide