Extracting waterline and inverting tidal flats topography based on Sentinel-2 remote sensing images: A case study of the northern part of the North Jiangsu radial sand ridges

Muddy tidal flats with landforms vary widely over space and time. The evolution of tidal flats topography has had a significant impact on the region. Therefore, there is a need to develop methods for rapidly and accurately characterizing tidal flats topography. This study applied thresholding segmentation (TS), machine learning, and two image classification methods to Sentinel-2 remote sensing images to extract the instantaneous waterline of the northern part of the North Jiangsu Radial sand Ridges (NJRSR). Tidal level data at specific time intervals were obtained using the Delft3D and TPXO9 models, after which tidal flats topography inversion was conducted. As a result, varied among the different classification methods, with the K-Nearest Neighbors (KNN) algorithm producing the optimal waterline extraction. Furthermore, the accuracy of tidal level simulation was improved by employing Delft3D software and constructing a scaled-down model of the study area. Comparisons with Delft3D model simulations of tidal levels with observations at three tide gauge stations yielded accuracies of 17.5 cm, 18.5 cm and 17.9 cm, this result showed that the establishment of the tidal level model can enhance the accuracy of tidal flats Digital Elevation Model (DEM) inversion. In fact, the combined application of the KNN algorithm and Delft3D model within retrieval of tidal level provided the most accurate topographic inversion, with an average error of 0.297 m, which was reduced to 0.292 m after median filtering, and the results indicated a trend of southward erosion in the tidal flats in the study area, with a turning point roughly located in the southern part of Doulong Port. The results of this study can help improve the future monitoring of dynamic changes in intertidal wetland topography and the conservation and development of tidal flats areas.