Analysis of Robotics Applied to Mobility in the Air Intakes of a Fighter Aircraft

被引：0

作者：

Vidal, Yuri Lester Silva ^{[1
]}

Supo, Elvis ^{[1
]}

Meneses, David ^{[1
]}

Flores, Erick Valdeiglesias ^{[1
]}

Noa, Fernando Uchamaco ^{[1
]}

Guevara, Joseph M. ^{[1
]}

Gutierrez, Jorge Luis Apaza ^{[1
]}

Alvarez, George Washington Galdos ^{[1
,2
]}

机构：

[1] Univ Nacl San Agustin Arequipa, Arequipa, Peru

[2] Peruvian Air Force Air Grp 4, Arequipa, Peru

来源：

INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND ROBOTICS RESEARCH | 2022年 / 11卷 / 12期

关键词：

Aircraft; robots; mobility; air intakes; caterpillar; wheel; suction cup; vortex; electro-adhesive; continuous; UAV; INSPECTION;

D O I：

10.18178/ijmerr.11.12.937-947

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

-For the correct operation of aircraft in the aerospace industry, maintenance and inspection protocols were designed to safeguard the safety of the pilot and the integrity of the aircraft, one of the spaces difficult to access for technicians responsible for the inspection of the aircraft are air intakes, That is why the maintenance area of the Peruvian Air Force (FAP) in collaboration with the National University of San Agustin (UNSA) conducted a review of the latest technological advances in robotics applied to mobility in confined spaces similar to the air intakes of a fighter plane, classifying them according to their locomotion system in wheel robots, caterpillar, adherent and contactless, in order to qualify their possible performance in the inspection work in compliance with the requirements requested by the institutions. Two values were assigned to each technology, the first one qualifies how well it complies with the requirements based on the results exposed in the literature and the second one evaluates the importance of each requirement calculated with the Mudge diagram based on the experience of the maintenance technicians, being the final qualification the product of both values; obtaining the highest score the mobility technology of the tracked robots, which in conclusion is the technology that could be better adapted for the work environment that in the future will be corroborated with the laboratory tests.

引用

页码：937 / 947

页数：11

共 50 条

[1]

Afreen S., 2020, P 2020 IEEE INT C MA, P1

[2] Embedded System for Motion Control of an Omnidirectional Mobile Robot [J].

Al Mamun, MD. Abdullah ;

Nasir, Mohammad Tariq ;

Khayyat, Ahmad .

IEEE ACCESS, 2018, 6 :1-18

[3]

Al-Razgan M., 2016, International Journal of Mechanical Engineering and Robotics Research, V5

[4]

Andrikopoulos G, 2019, IEEE INT C INT ROBOT, P1460, DOI [10.1109/iros40897.2019.8968069, 10.1109/IROS40897.2019.8968069]

[5]

[Anonymous], 2018, Avion de combate Dassault Mirage 2000 de la Fuerza Aerea Francesa despegando durante el ejercicio Frisian Flag

[6] Robot for Boiler Header Inspection "LS-01" [J].

Baharuddin, Mohd Zafri ;

Saad, Juniza Md ;

Anuar, Adzly ;

Ismail, Iszmir Nazmi ;

Basri, Nur Maisurah Hassan ;

Roslin, Nur Shahida ;

Mohideen, Syed Sulaiman Kaja ;

Jalal, Muhammad Fairuz Abdul ;

Sahari, Khairul Salleh Mohamed .

INTERNATIONAL SYMPOSIUM ON ROBOTICS AND INTELLIGENT SENSORS 2012 (IRIS 2012), 2012, 41 :1483-1489

[7]

Borik A., 2019, P 2019 ADV SCI ENG T, P1

[8]

Brusell A, 2019, IEEE IND ELEC, P756, DOI 10.1109/IECON.2019.8926997

[9] Inverted and vertical climbing of a quadrupedal microrobot using electroadhesion [J].

de Rivaz, Sebastien D. ;

Goldberg, Benjamin ;

Doshi, Neel ;

Jayaram, Kaushik ;

Zhou, Jack ;

Wood, Robert J. .

SCIENCE ROBOTICS, 2018, 3 (25)

[10] Development of a slender continuum robotic system for on-wing inspection/repair of gas turbine engines [J].

Dong, X. ;

Axinte, D. ;

Palmer, D. ;

Cobos, S. ;

Raffles, M. ;

Rabani, A. ;

Kell, J. .

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING, 2017, 44 :218-229

← 1 2 3 4 5 →