Preparation and properties of three-dimensional continuous network reinforced Graphite/SiC ceramic composite insulation materials

Addressing the challenge of existing insulation materials struggling to achieve the synergy of lightweight construction, high strength, and low thermal conductivity, this paper presents a method based on multi-material assembly technology to achieve a controlled composite of a three-dimensional continuous silicon carbide network and graphite matrix. Following an examination of the impact of various forming densities and the addition of expandable graphite on the thermal conductivity and compressive strength of graphite/SiC composites, the study explored the effects of different "enhancement network" topologies on the properties of these composites. The investigation demonstrates that adjusting the forming density and incorporating expandable graphite enable regulation of both the porosity and closed porosity of the composites, thereby controlling their compressive strength and thermal conductivity. Additionally, the construction of a three-dimensional continuous SiC network structure within the graphite matrix significantly enhances the compressive strength of the composites, with only a slight increase in thermal conductivity. A graphite/SiC composite thermal insulation material was ultimately developed, boasting a density of merely 1.1 g/cm3, a low thermal conductivity of 1.847 W/m center dot K, and an impressive compressive strength reaching 15.627 MPa. Its overall performance surpasses that of waterglass sand, making it a promising candidate for various applications in the foundry industry as a thermal insulation material.