Recycling waste plastics in asphalt mixture: Engineering performance and environmental assessment

The surging quest for asphalt pavement sustainable approaches promotes the need for balancing environmental and economic benefits. With the global production of waste plastics (WP) reaching drastic levels and recycling rates remaining disappointingly low, policymakers are increasingly advocating for the reuse of post -consumer recycled plastics in construction materials. In this study, recycling WP emerges as the most feasible solution, particularly when considering the environmental hazards associated with burning and landfilling, such as air and soil pollution. Recycling WP in asphalt mixture specifically has been quested due to the high -daily production of asphalt mixture, but concerns exist regarding its engineering performance. This study's focus is to assess the asphalt mixture mechanical response while incorporating WP, particularly High -Density Polyethylene (HP), in addition to assessing their environmental impacts. Four asphalt mixtures were rigorously evaluated containing four different asphalt binders: polymer -modified PG 76-22 and PG 70-22, unmodified PG 67-22, and HPmodified PG 67-22 asphalt binders. The investigation encompassed an in-depth analysis of asphalt binder rheological characteristics and asphalt mixtures' mechanical properties. A pivotal aspect of this study was comparing the environmental benefits of HP -modified asphalt binders against conventional polymer -modified ones. This comparison was conducted through a detailed cradle -to -gate life -cycle assessment (LCA). Results indicate that asphalt mixture containing WP material demonstrated similar engineering performance as compared to conventional mixture containing PG 70-22 asphalt binder. Further, the LCA analysis revealed that the inclusion of HP WP in asphalt binders, as compared to PG 76-22 and PG 70-22 asphalt binders, can significantly lower the global warming potential by 17.7% and 8.9%, respectively.