Effects of sintering temperature on the microstructure evolution and mechanical properties of TiB2-20 wt% CoNi cermets

被引：11

作者：

Wu, Ning ^{[1
]}

Xue, Fengdan ^{[2
]}

He, Jiayi ^{[2
]}

Luo, Kuangxin ^{[2
]}

Luo, Fenghua ^{[2
]}

机构：

[1] Cent South Univ, Sch Met & Environm, Changsha 410083, Peoples R China

[2] Cent South Univ, State Key Lab Powder Met, Changsha 410083, Peoples R China

来源：

JOURNAL OF ALLOYS AND COMPOUNDS | 2024年 / 988卷

关键词：

TiB 2-CoNi cermets; Sintering temperature; Microstructure evolution; Mechanical properties; Strengthening and toughening mechanisms; ULTRAHIGH STRENGTH; METALLIC GLASSES; PHASE EVOLUTION; COMPOSITES; BEHAVIOR; VACUUM; ALLOY;

D O I：

10.1016/j.jallcom.2024.174259

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

Microstructure evolution and mechanical properties of TiB2-CoNi cermets at different sintering temperatures were investigated. A small amount of liquid phase appeared between 1362 degrees C and 1398 degrees C. Solid phase sintering mainly occurred below this temperature range, while liquid phase sintering mainly occurred above this temperature range. At around 1460 degrees C, dissolution and re-precipitation occurred around TiB2 particles due to liquid phase migration. Only TiB2 and CoNi phases were detected on XRD patterns at different sintering temperatures. As the sintering temperature increased, the relative density, fracture toughness, transverse fracture strength, and hardness of cermets increased, while their porosity decreased. The main influencing factors on the properties of cermets sintered at 1460 degrees C and above were the interface bonding strength and the grain size, while the porosity was the main influencing factor for cermets sintered below 1460 degrees C.

引用

页数：11

共 33 条

[1] Metallic glasses as structural materials [J].

Ashby, MF ;

Greer, AL .

SCRIPTA MATERIALIA, 2006, 54 (03) :321-326

[2] Processing and properties of Ti (C, N)-WC-based materials [J].

Bellosi, A ;

Medri, V ;

Monteverde, F .

JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2001, 84 (11) :2669-2676

[3] Investigation of the main influencing parameters on the degassing behavior of titanium carbonitrides using mass spectrometry [J].

Findenig, Gerald ;

Buchegger, Christoph ;

Lengauer, Walter ;

Veitsch, Christopher ;

Demoly, Alban .

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2017, 63 :38-46

[4] Pressureless sintering of TiB2 with low concentration of Co binder to achieve enhanced mechanical properties [J].

Fu, Zhezhen ;

Koc, Rasit .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 721 :22-27

[5] Cobalt-based bulk glassy alloy with ultrahigh strength and soft magnetic properties [J].

Inoue, A ;

Shen, BL ;

Koshiba, H ;

Kato, H ;

Yavari, AR .

NATURE MATERIALS, 2003, 2 (10) :661-663

[6] Fabrication and properties of TiB2-based cermets by spark plasma sintering with CoCrFeNiTiAl high-entropy alloy as sintering aid [J].

Ji, Wei ;

Zhang, Jinyong ;

Wang, Weimin ;

Wang, Hao ;

Zhang, Fan ;

Wang, Yucheng ;

Fu, Zhengyi .

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2015, 35 (03) :879-886

[7] Effect of ultra-fine powders on the microstructure of Ti(CN)-xWC-Ni cermets [J].

Jung, JK ;

Kang, SH .

ACTA MATERIALIA, 2004, 52 (06) :1379-1386

[8] Pressureless sintering and properties of titanium diboride ceramics containing chromium and iron [J].

Kang, SH ;

Kim, DJ ;

Kang, ES ;

Baek, SS .

JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2001, 84 (04) :893-895

[9] Oxygen impurity and microalloying effect in a Zr-based bulk metallic glass alloy [J].

Liu, CT ;

Chisholm, MF ;

Miller, MK .

INTERMETALLICS, 2002, 10 (11-12) :1105-1112

[10] Role of yttrium in glass formation of Fe-based bulk metallic glasses [J].

Lu, ZP ;

Liu, CT ;

Porter, WD .

APPLIED PHYSICS LETTERS, 2003, 83 (13) :2581-2583

← 1 2 3 4 →