A signal energy-based acoustic source localization technique for composite laminates

被引:0
作者
Ma, Chenning [1 ]
Zhou, Zixian [1 ]
Cui, Zhiwen [1 ,2 ]
Kundu, Tribikram [3 ,4 ]
机构
[1] Jilin Univ, Dept Acoust & Microwave Phys, Coll Phys, Changchun 130012, Jilin, Peoples R China
[2] Chinese Acad Sci, Inst Acoust, State Key Lab Acoust, Beijing 100190, Peoples R China
[3] Univ Arizona, Dept Civil & Architectural Engn & Mech, Tucson, AZ 85721 USA
[4] Univ Arizona, Aerosp & Mech Engn Dept, Tucson, AZ 85721 USA
来源
HEALTH MONITORING OF STRUCTURAL AND BIOLOGICAL SYSTEMS XVIII | 2024年 / 12951卷
关键词
acoustic emission; source localization; signal energy-based approach; composite laminates; sensors;
D O I
10.1117/12.3008557
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Acoustic source localization techniques for composite laminates are challenging for anisotropic materials. In this paper, an improved signal energy-based acoustic source localization technique without a priori knowledge of the principal axes orientations is proposed. The proposed technique has the advantages of no need to measure arrival time and does not need complex signal processing techniques. It can also be applied in the case of low signal-to-noise ratio. Finite element models of carbon fiber laminate with different stacking sequences are created to verify the proposed technique. The results of the numerical simulation demonstrate the feasibility of the proposed technique.
引用
收藏
页数:6
相关论文
共 10 条
[1]   Long-range impact localization with a frequency domain triangulation technique: Application to a large aircraft composite panel [J].
Goutaudier, Dimitri ;
Gendre, Didier ;
Kehr-Candille, Veronique ;
Ohayon, Roger .
COMPOSITE STRUCTURES, 2020, 238
[2]   Guided wave scattering at a delamination in a quasi-isotropic composite laminate: Experiment and simulation [J].
Hervin, F. ;
Maio, L. ;
Fromme, P. .
COMPOSITE STRUCTURES, 2021, 275
[3]   The Effect of High Glass Fiber Content and Reinforcement Combination on Pulse-Echo Ultrasonic Measurement of Composite Ship Structures [J].
Lee, Sang-Gyu ;
Oh, Daekyun ;
Woo, Jong Hun .
JOURNAL OF MARINE SCIENCE AND ENGINEERING, 2021, 9 (04)
[4]   Acoustic source localization in an anisotropic plate without knowing its material properties - A new approach [J].
Park, Won Hyun ;
Packo, Pawel ;
Kundu, Tribikram .
ULTRASONICS, 2017, 79 :9-17
[5]   Impact behaviour of hybrid composites for structural applications: A review [J].
Safri, Syafiqah Nur Azrie ;
Sultan, Mohamed Thariq Hameed ;
Jawaid, Mohammad ;
Jayakrishna, Kandasamy .
COMPOSITES PART B-ENGINEERING, 2018, 133 :112-121
[6]   A new signal energy-based approach to acoustic source localization in orthotropic plates: A numerical study [J].
Sen, Novonil ;
Kundu, Tribikram .
MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2022, 171
[7]   Optimal design of fighter aircraft wing panels laminates under multi-load case environment by ply-drop and ply-migrations [J].
Shrivastava, Sachin ;
Mohite, P. M. ;
Limaye, M. D. .
COMPOSITE STRUCTURES, 2019, 207 :909-922
[8]   Correlation between lamina directions and the mechanical characteristics of laminated bamboo composite for ship structure [J].
Tuswan, Tuswan ;
Manik, Parlindungan ;
Samuel, Samuel ;
Suprihanto, Agus ;
Sulardjaka, Sulardjaka ;
Nugroho, Sri ;
Pakpahan, Boris Ferdinando .
CURVED AND LAYERED STRUCTURES, 2023, 10 (01)
[9]   Experimental study of carbon/glass fiber-reinforced hybrid laminate composites with torsional loads by using acoustic emission and Micro-CT [J].
Zhao, Wenzheng ;
Pei, Ning ;
Xu, Chunguang .
COMPOSITE STRUCTURES, 2022, 290
[10]   A rapid technique for detecting and localizing damage in composite laminates [J].
Zhou, Zixian ;
Cui, Zhiwen ;
Liu, Jinxia ;
Kundu, Tribikram .
ENGINEERING FRACTURE MECHANICS, 2023, 277