Enhancement of visible-light photocatalysis of TiO 2 via nanocomposite incorporating with Fe(III) species

This paper introduces a novel approach for the synthesis of photocatalytic nanocomposites via a fast reaction occurring at ambient conditions between the strong base NaOH and FeCl3 solution to obtain a fresh precipitate of Fe(OH)3 in the presence of TiO2 nanoparticles. FE-SEM analysis revealed a restructured state of TiO2 particles on the surface of colloidal Fe(OH)3. Solid-phase studies, including XRD and FT-IR, indicated a phase transformation from Fe(OH)3 to gamma-Fe2O3 during the formation of the nanocomposite. UV-Vis diffuse reflectance measurements confirmed a significant reduction in the band gap of the synthesized composite, indicating its potentials as a photocatalyst under visible light irradiation. Another advantage of this composite type is its rapid sedimentation ability within minutes, facilitating post-processes such as phase separation and catalyst reuse on a large scale, which are challenging in the case of TiO2 nanoparticles. Inducing photocatalysis under visible light, the efficiency in degrading persistent colorants was demonstrated through a case study of indigo carmine (IC), which exhibited a threefold improvement in degradation efficiency for the case of the nanocomposite compared to the original TiO2. Indeed, the IC degradation process was studied in consideration of various factors such as Fe/Ti ratio in the catalyst, illumination time, colorant concentration, catalyst dosage, and pH of the environment. Additionally, mineralization studies confirmed the oxidation of IC to CO2 rather than the formation of potentially toxic intermediates. Furthermore, the stability of the catalyst was examined through six cycles of reuse.