Synchrotron X-ray diffraction studies of the internal load transfer in Ni-CrC metal matrix composites

Strengthening in metal matrix composites (MMCs) is primarily due to the load transfer from the compliant matrix to the stiff reinforcement. While internal load transfer has been studied for conventionally manufactured MMCs, the extent to which it may be affected by the preexisting defects in additively manufactured MMCs remain elusive. In this study, we performed uniaxial compression loading on cold sprayed Ni -CrC particulate-reinforced MMC. We observe significantly enhanced strength and ductility compared to the brittle behavior previously reported in tension for the same MMC. In contrast to the absence of load transfer in tension, the presence of initial defects did not preclude the internal load transfer in the composites under compressive loading. In-situ high-energy X-ray diffraction analysis revealed a relatively constant load partitioning in the elastic regime, which aligned well with predictions by the Eshelby 's inclusion model. Furthermore, an internal load transfer was observed from the Ni matrix to the CrC reinforcement upon plastic deformation of the Ni matrix. Finite element modeling further confirmed this and demonstrated that localized tensile stress at the interface in the transverse direction resulted in the interfacial debonding and partial relaxation of the matrix. We also report reinforcing particle fracture upon further compression which in turn triggered the eventual failure of the MMC.