Architecture influence on acoustic performance, EMI shielding, electrical and thermal, properties of 3D printed PLA/graphite/molybdenum disulfide composites

被引：4

作者：

Lapinska, Anna ^{[1
,6
]}

Grochowska, Natalia ^{[1
]}

Cieplak, Kamil ^{[2
]}

Platek, Pawel ^{[2
]}

Wood, Paul ^{[3
]}

Deuszkiewicz, Piotr ^{[4
]}

Duzynska, Anna ^{[1
]}

Sztorch, Bogna ^{[5
]}

Glowcka, Julia ^{[5
]}

Przekop, Robert ^{[5
]}

Jozwik, Pawel ^{[6
]}

Golofit, Tomasz ^{[7
]}

Plichta, Andrzej ^{[7
]}

机构：

[1] Warsaw Univ Technol, Fac Phys, Ul Koszykowa 75, PL-00662 Warsaw, Poland

[2] Mil Univ Technol, Fac Mechatron Armament & Aerosp, Ul Gen Sylwestra Kaliskiego 2, PL-00908 Warsaw, Poland

[3] Univ Derby, Inst Innovat Sustainable Engn, Quaker Way, Derby DE1 3HD, England

[4] Warsaw Univ Technol, Fac Automot & Construct Machinery Engn, ul Ludwika Narbutta 84, PL-02524 Warsaw, Poland

[5] Adam Mickiewicz Univ, Ctr Adv Technol, 10 Uniwersytetu Poznanskiego, PL-61712 Poznan, Poland

[6] Mil Univ Technol, Fac Adv Technol & Chem, Ul Gen Sylwestra Kaliskiego 2, PL-00908 Warsaw, Poland

[7] Univ Warsaw, Fac Chem, ul Koszykowa 75, PL-00662 Warsaw, Poland

来源：

MATERIALS & DESIGN | 2024年 / 245卷

关键词：

FFF printing; Architecture influence; Thermal conductivity; EMI shielding; Acoustic performance; PLA; Graphite; Molybdenum disulfide; POLYMER COMPOSITES; MECHANICAL-PROPERTIES; CONDUCTIVITY; ENHANCEMENT; NANOSHEETS;

D O I：

10.1016/j.matdes.2024.113241

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Fused Filament Fabrication (FFF) is one of the most emerging techniques nowadays. Affordable, easy to use, economical, for a broad audience - from specialists to home users. These are only several of its advantages. A disadvantage is the limited number of available filament types, especially those with high performance. Therefore, the aim of the work was to investigate the properties of custom-made filament printouts based on polylactic (PLA), graphite (G) and molybdenum disulfide (MoS2). This work looked at structural and thermal analysis, acoustic performance, EMI shielding, and electrical and thermal properties, including thermal conductivity and heat diffusivity. The following were considered during the study: type of printing architecture, infill density, and filament formulations. Among the best values, which were obtained for the highest loaded sample based on 15 wt% graphite and 2 wt% MoS2 (G15/M2), where EMI shielding effectiveness surpassed SETOT similar to 17 dB (per 1 mm sample thickness), electrical conductivity remained at a low level. It exceeded sigma similar to 0.2 S/m; thermal conductivity was slightly over kappa similar to 0.4 W/mK, and heat diffusivity was almost alpha similar to 0.4 mm(2)/s. This work is the first step in designing high-performance materials dedicated to advanced applications based on the FFF technique.

引用

页数：16