WASTE HEAT RECOVERY BY BINARY VAPOR CYCLE FOR GASES FROM MARINE ENGINES

The considerable energy waste in maritime transport and the need to obtain alternatives to reduce emissions of polluting gases are factors that have motivated the study of waste heat recovery systems for marine engines. The system studied herein relies on a binary vapor cycle that uses water for the topping cycle while three organic fluids were investigated for the bottoming cycle: R601a, R134a, and R22. Each of these belongs to a different category of fluid, namely dry fluid, isentropic fluid, and wet fluid, respectively. Two engines of different ratings and two different pressures of the heat recovery steam generator have been considered for each engine. Various outlet pressures for the topping turbine, which is the most liable to erosion and corrosion due to wet steam, have been investigated. The maximum efficiency achieved for the waste heat recovery system peaked at 21% while the maximum electric power accounted for 4.2% of engine brake power. Therefore, the employment of a waste heat recovery system based on a binary cycle seems a promising alternative to harnessing heat from the exhaust gases of marine engines.