The enhancement of photocatalytic hydrogen production over Ag2WO4 modified g-C3N4 with Pt as cocatalyst

The construction of heterojunction photocatalyst is an effective mean to improve the photoexcited electron-hole pair separation. The Ag2WO4-doped graphitic carbon nitride (g-C3N4, C3N4 for short) composite photocatalysts were fabricated by a simple calcination and in-situ depositing strategy. The composites were characterized by different techniques. The effects of Ag2WO4 content, type of scavengers, pH value of reaction solution and dose of scavenger on photocatalytic hydrogen (H-2) generation were studied. It was found that the Ag2WO4 micro-nano particles were highly dispersed on the C3N4 surface. After doping Ag2WO4, the light absorption range of Ag2WO4-C3N4 material was broadened effectively from 440 nm to 448 nm, and the BET surface area of C3N4 was increased from 35.63 to 40.73 cm(2)<middle dot>g(-1), indicating that Ag2WO4 loading could provide some new BET surface areas. The binding energy of all elements in Ag2WO4-4/C3N4 was clearly shifted due to the charge transfer from C3N4 to Ag2WO4, implying a strong interaction between C3N4 and Ag2WO4. The photocatalytic H-2 production rate of the optimized Ag2WO4-4/C3N4 was 6047.4 mu mol<middle dot>g(-1)<middle dot>h(-1), which was 2.04 and 171.8 times that of C3N4 and Ag2WO4, respectively. While Ag2WO4-4/C3N4 exhibited a poor H-2 production performance in the absence of Pt co-catalyst (309.3 mu mol<middle dot>g(-1)<middle dot>h(-1)), indicating the formation of heterojunction among Ag2WO4, C3N4 and Pt.