Fabricating AC/DC nanogenerators based on single ZnO nanowires by using a nanomanipulator in a scanning electron microscope

被引:0
|
作者
Mei Liu [1 ,2 ]
Mengfan He [1 ]
Aristide Djoulde [1 ]
Lingdi Kong [1 ]
Weilin Su [1 ]
Xin Bai [1 ]
Jinbo Chen [1 ]
Jinjun Rao [1 ]
Zhiming Wang [1 ]
机构
[1] Shanghai Key Laboratory of Intelligent Manufacturing and Robotics,School of Mechatronic Engineering and Automation,Shanghai University
[2] Guangdong Provincial Key Laboratory of Fuel Cell Technology,School of Chemistry and Chemical Engineering,South China University of
关键词
D O I
暂无
中图分类号
TB383.1 []; TM31 [发电机、大型发电机组(总论)];
学科分类号
摘要
Single zinc oxide nanowires (ZnO NWs) are promising for nanogenerators because of their excellent semiconducting and piezoelectric properties,but characterizing the latter efficiently is challenging.As reported here,an electrical breakdown strategy was used to construct single ZnO NWs with a specific length.With the high operability of a nanomanipulator in a scanning electron microscope,ZnO-NW-based twoprobe and three-probe structures were constructed for fabricating AC/DC nanogenerators,respectively.For a ZnO NW,an AC output of between-15.31 mV and 5.82 mV was achieved,while for a DC nanogenerator,an output of 24.3 m V was realized.Also,the three-probe structure’s output method was changed to verify the distribution of piezoelectric charges when a single ZnO NW is bent by a probe,and DC outputs of different amplitudes were achieved.This study provides a low-cost,highly convenient,and operational method for studying the AC/DC output characteristics of single NWs,which is beneficial for the further development of nanogenerators.
引用
收藏
页码:29 / 35
页数:7
相关论文
共 50 条
  • [1] Fabricating AC/DC nanogenerators based on single ZnO nanowires by using a nanomanipulator in a scanning electron microscope
    Liu, Mei
    He, Mengfan
    Djoulde, Aristide
    Kong, Lingdi
    Su, Weilin
    Bai, Xin
    Chen, Jinbo
    Rao, Jinjun
    Wang, Zhiming
    NANOTECHNOLOGY AND PRECISION ENGINEERING, 2024, 7 (02)
  • [2] Mechanical characterization of nanofibers using a nanomanipulator and atomic force microscope cantilever in a scanning electron microscope
    Hwang, Kenny Yoonki
    Kim, Sung-Dae
    Kim, Young-Woon
    Yu, Woong-Ryeol
    POLYMER TESTING, 2010, 29 (03) : 375 - 380
  • [3] Focused Ion Beam Treatment of ZnO Nanowires in the Scanning Electron Microscope
    Shmavonyan, G. Sh.
    JOURNAL OF CONTEMPORARY PHYSICS-ARMENIAN ACADEMY OF SCIENCES, 2008, 43 (02) : 86 - 90
  • [4] Focused ion beam treatment of ZnO nanowires in the scanning electron microscope
    G. Sh. Shmavonyan
    Journal of Contemporary Physics (Armenian Academy of Sciences), 2008, 43 (2) : 86 - 90
  • [5] Enhanced adhesion of ZnO nanowires during in situ scanning electron microscope peeling
    Mead, J. L.
    Xie, H.
    Wang, S.
    Huang, H.
    NANOSCALE, 2018, 10 (07) : 3410 - 3420
  • [6] In situ measurement of the kinetic friction of ZnO nanowires inside a scanning electron microscope
    Polyakov, Boris
    Dorogin, Leonid M.
    Lohmus, Ants
    Romanov, Alexey E.
    Lohmus, Rynno
    APPLIED SURFACE SCIENCE, 2012, 258 (07) : 3227 - 3231
  • [7] Simultaneous measurement of static and kinetic friction of ZnO nanowires in situ with a scanning electron microscope
    Polyakov, Boris
    Dorogin, Leonid M.
    Vlassov, Sergei
    Kink, Ilmar
    Romanov, Alexey E.
    Lohmus, Rynno
    MICRON, 2012, 43 (11) : 1140 - 1146
  • [8] Nanorobotic Manipulation inside Scanning Electron Microscope for the Electrical and Mechanical Characterization of ZnO nanowires
    Liu, Mei
    Djoulde, Aristide
    Yang, Quan
    Su, Weilin
    Kong, Lingli
    Rao, Jinjun
    Chen, Jinbo
    Wang, Zhiming
    2021 IEEE 16TH INTERNATIONAL CONFERENCE ON NANO/MICRO ENGINEERED AND MOLECULAR SYSTEMS (NEMS), 2021, : 919 - 924
  • [9] Mechanical Characterization of Nickel Nanowires by using a Customized Atomic Microscope in Scanning Electron Microscope
    Celik, Emrah
    Guven, Ibrahim
    Madenci, Erdogan
    2011 IEEE 61ST ELECTRONIC COMPONENTS AND TECHNOLOGY CONFERENCE (ECTC), 2011, : 1999 - 2006
  • [10] Advancement in fabrication of carbon nanotube tip for atomic force microscope using multi-axis nanomanipulator in scanning electron microscope
    Kanth, Sanjeev Kumar
    Sharma, Anjli
    Park, Byong Chon
    Song, Woon
    Ruh, Hyun
    Hong, Jaewan
    NANOTECHNOLOGY, 2022, 33 (17)