Improvement in effectiveness of diamond in strengthening the porous aluminium composite

被引：1
作者：
Parveez B. [1 ]
Jamal N.A. [1 ]
Maleque M.A. [1 ]
Ahmad Azhar A.Z. [1 ]
Mohd Zaki H.H. [1 ]
Aabid A. [2 ]
Baig M. [2 ]
机构：
[1] Department of Manufacturing and Materials Engineering, Kulliyyah of Engineering, International Islamic University Malaysia, Kuala Lumpur
[2] Department of Engineering Management, College of Engineering, Prince Sultan University, P.O. Box 66833, Riyadh
来源：
Journal of Materials Research and Technology | 2023年 / 25卷
关键词：
Compressive properties; Diamond; Porous aluminium composites; Powder metallurgy;
D O I：
10.1016/j.jmrt.2023.05.190
中图分类号：
学科分类号：
摘要：
In this study, an aluminum (Al) alloy matrix reinforced with uncoated and titanium (Ti) -coated diamond were developed using powder metallurgy technique where polymethylmethacrylate (PMMA) particles were employed as space holders. The weight % of uncoated and coated diamond varied as (0, 6, 9, 12, 15, and 20 wt.%). Microstructural and elemental analysis was examined using scanning electron microscopy and energy dispersive spectroscope, respectively. The relative density and porosity that were in the range of 0.72–0.92 and 31–44% respectively, were measured using Archimedes principle. The compressive properties were measured and correlated with microstructure observations. The microstructure of the composite samples revealed presence of well-defined macro pores with good interfacial integrity. The X-ray diffraction revealed the presence of strengthening phases such as Al2Ti, Mg2Sn, AlB12, Cu5Sn6, Al12Mg17 and MgB2 phases formed as a result of addition of metal additives in Al matrix. Further improvement in the strength was obtained by using Ti-coated diamond particles as reinforcement. As Ti formed a good interface between the Al alloy matrix and the diamond thereby preventing the formation of undesirable carbide phases. There was an improvement in plateau stress and energy absorption capacity of 82 and 88% as compared to unreinforced porous sample. The maximum values obtained for the plateau stress and energy absorption capacity were 45.12 MPa and 13.68 MJ/m3 respectively for 9 wt.% of Ti-coated diamond reinforced composites. Uncoated diamond reinforced composites, on the other hand, reduced the strength of porous Al alloy matrix due to the formation of brittle intermetallic compound such as carbides (Al2C3) at the interface. As a result, the coated diamond particle surface modifies and improves the wettability of the Al alloy matrix and diamond interface. © 2023 The Authors
引用
收藏
页码：25 / 37
页数：12
相关论文
共 82 条
[1]  
Liu P.S., Chen G.F., Porous materials: processing and applications, (2014)
[2]  
Parveez B., Jamal N.A., Maleque A., Yusof F., Jamadon N.H., Adzila S., Review on advances in porous Al composites and the possible way forward, J Mater Res Technol, 14, pp. 2017-2038, (2021)
[3]  
Atwater M.A., Guevara L.N., Darling K.A., Tschopp M.A., Solid state porous metal production: a review of the capabilities, characteristics, and challenges, Adv Eng Mater, 20, pp. 1-33, (2018)
[4]  
Aboraia M., Sharkawi R., Doheim M.A., Production of aluminium foam and the effect of calcium carbonate as a foaming agent, 39, pp. 441-451, (2011)
[5]  
Nakamura T., Gnyloskurenko S.V., Sakamoto K., Byakova A.V., Ishikawa R., Development of new foaming agent for metal foam, Mater Trans, 43, pp. 1191-1196, (2002)
[6]  
Mukherjee M., Garcia-Moreno F., Jimenez C., Rack A., Banhart J., Microporosity in aluminium foams, Acta Mater, 131, pp. 156-168, (2017)
[7]  
Jiang B., Wang Z., Zhao N., Effect of pore size and relative density on the mechanical properties of open cell aluminum foams, Scripta Mater, 56, pp. 169-172, (2007)
[8]  
Mohd Razali R.N., Abdullah B., Ismail M.H., Ahmad U.K., Idham M.F., Rasmli A., Mechanical properties of aluminium foam by conventional casting combined with NaCL space holder, Appl Mech Mater, 393, pp. 156-160, (2013)
[9]  
Krommenhoek M., Shamma M., Morsi K., Processing, characterization, and properties of aluminum–carbon nanotube open-cell foams, J Mater Sci, 52, pp. 3927-3935, (2017)
[10]  
Tan P.P., Mohamad H., Anasyida A.S., Properties of porous magnesium using polymethyl methacrylate (PMMA) as a space holder, J Phys Conf Ser, 1082, (2018)
123456789