Numerical Simulation and Evaluation of Attached Cavitation with Different Cavitation Models

被引:0
作者
Hou X. [1 ]
Hu J. [1 ]
Yu Y. [1 ]
机构
[1] School of Aerospace Engineering, Beijing Institute of Technology, Beijing
来源
Binggong Xuebao/Acta Armamentarii | 2020年 / 41卷
关键词
Attached cavitation; Cavitation flow; Schnerr-Sauer cavitation model; Singhal cavitation model;
D O I
10.3969/j.issn.1000-1093.2020.S1.013
中图分类号
学科分类号
摘要
In order to analyze a application of Singhal cavitation model and Schner-Sauer cavitation model in steady cavitation simulation, the steady cavitating flows over a 2D NACA0009 (MOD) hydrofoil with angle of attack of 2.5° and Re=2×106 are numerically investigated based on RANS method by Fluent 18.2. The Realizable k-ε turbenlence model and Mixture multiphase model are used for numerical simulation. The cavitation number is between 0.75 and 0.90. Simulated results of the two cavitation models were analyzed and compared with experimental data. The results show that the length of cavity increases as the cavitation number decreases, and the pressure distributions of hydrofoil leading edge simulated by the two cavitation models are significantly different. The cavitation range simulated by Singhal cavitation model is larger. On the near-wall surface and in cavity wake region, both cavitation models cannot be used to accurately capture complex flow phenomena. © 2020, Editorial Board of Acta Armamentarii. All right reserved.
引用
收藏
页码:91 / 96
页数:5
相关论文
共 10 条
[1]  
HUANG B, WU Q, WANG G Y., Progress and prospects of investigation into unsteady cavitating flows, Journal of Drainage and Irrigation Machinery Engineering, 36, 1, pp. 1-14, (2018)
[2]  
BRENEN C E., Fundamentals of mulitiphase flow, (2005)
[3]  
ZHAO C G, WANG C, WEI Y J, Et al., Experiment of cavitation and ballistic characteristics of slender body underwater movement, Explosion and Shock Waves, 37, 3, pp. 439-446, (2017)
[4]  
LIU Y Q, LU C J, LI J, Et al., An investigation of ventilated cavitating flow in vertical launching of a missile, Chinese Journal of Hydrodynamics, 22, 5, pp. 25-30, (2007)
[5]  
ZHOU H C, XIANG M, ZHANG W H., Numerical research on interaction between control surfaces and main cavity of supercavitating vehicles, Acta Armamentarii, 38, 5, pp. 949-958, (2017)
[6]  
JI B, HONG F W, PENG X X., The numerical aynalysis of shedding characteristics on partial cavitation over 2D hydrofoils, Chinese Journal of Hydrodynamics, 23, 4, pp. 412-418, (2008)
[7]  
SINGHALl A K, ATHAVALE M M, LI H Y, Et al., Mathematical basis and validation of the full cavitation model, Journal of Fluids Engineering, 124, 3, pp. 617-624, (2002)
[8]  
SAUER J, SCHNERR G H., Development of a new cavitation model based on bubble dynamics, Journal of Applied Mathematics and Mechanics, 81, 3, pp. 561-562, (2001)
[9]  
BOUZIAD Y A., Physical modelling of leading edge cavitation: computational methodologies and application to hydraulic machinery.Citeseer, (2006)
[10]  
ASNAGHI A, FEYMARK A, BENSOW R E., Improvement of cavitation mass transfer modeling based on local flow properties, International Journal of Multiphase Flow, 93, pp. 142-157, (2017)