Study on the mechanical properties of tropical hybrid cross laminated timber using bamboo laminated board as layer

被引：1

作者：

Galih N.M. ^{[1
]}

Yang S.M. ^{[1
]}

Yu S.M. ^{[1
]}

Kang S.G. ^{[1
]}

机构：

[1] Deparment of Biobased Materials, College of Agriculture and Life Science, Chungnam National University, Deajeon

来源：

Journal of the Korean Wood Science and Technology | 2020年 / 48卷 / 02期

关键词：

Acacia wood; Bamboo board; Hybrid cross-laminated timber; Modulus of elasticity; Modulus of rupture; Tropical species;

D O I：

10.5658/WOOD.2020.48.2.245

中图分类号：

学科分类号：

摘要：

This study was performed to analyze the mechanical properties of tropical hybrid cross-laminated timber (CLT) with bamboo laminated board as the core layer in order to evaluate the possibility of its use as a CLT material. Bamboo board was used as the core layer and the tropical species Acacia mangium willd., from Indonesia, was used as the lamination in the outer layer. The modulus of elasticity (MOE), modulus of rupture (MOR), and shear strength of the hybrid CLT were measured according to APA PRG 320-2018 Standard for Performance-Rated Cross-Laminated Timber. The results show that the bending MOE of the hybrid CLT was found to be 2.76 times higher than SPF (Spruce Pine Fir) CLT. The reason why the high MOE value was shown in bamboo board and hybrid CLT applied bamboo board is because of high elasticity of bamboo fiber. However, the shear strength of the hybrid CLT was 0.8 times lower than shear strength of SPF CLT. © 2020, Korean Society of Wood Science Technology. All rights reserved.

引用

页码：245 / 252

页数：7

共 28 条

[1]

Andi S.R.D.L., Hadi Y.S., Hermawan D., Santoso A., Physical and Mechanical Properties of Glued Laminated Lumber of Pine (Pinus merkusii) and Jabon (Anthocephalus cadamba), Journal of the Korean Wood Science and Technology, 46, 2, pp. 143-148, (2018)

[2]

PRG 320 Standard for Performancerated Cross-Laminated Timber, (2018)

[3]

Statistic of Forest Production, (2017)

[4]

Brandner R., Flatscher G., Ringhofer A., Schickhofer G., Thiel A., Cross laminated timber (CLT): Overview and development, European Journal of Wood and Wood Products, 74, pp. 311-351, (2016)

[5]

Choi C., Yuk C.R., Yoo J.C., Park J.Y., Lee C.G., Kang S.G., Physical and mechanical properties of cross laminated timber using plywood as core layer, Journal of the Korean Wood Science and Technology, 43, 1, pp. 86-95, (2015)

[6]

Chio C., Kojima E., Kim K.J., Yamasaki M., Sasaki Y., Kang S.G., Analysis of mechanical properties of cross-laminated timber(CLT) with plywood using Korean larch, Bioresources, 13, 2, pp. 2715-2726, (2018)

[7]

Choi Y.S., Park J.H., Lee J.H., Shin J.H., Jang S.W., Kim H.G., Preparation of EVA/Intumescent/ Nano-Clay Composite with Flame Retardant Properties and Cross Laminated Timber(CLT), Journal of the Korean Wood Science and Technology, 46, 1, pp. 73-84, (2018)

[8]

Gong M., Lumber-Based Mass Timber Products in Construction, Timber Buildings and Constructions, 1, 20, (2019)

[9]

Hegde M., Palanisamy K., Yi J.S., Acacia mangium Wild: A Fast Growing Tree for Tropical Plantation, Journal of Forest Science, 29, 1, pp. 1-14, (2013)

[10]

Hong M.K., Park B.D., Kim K.H., Shim K.B., Performance of Melamine-Urea-Formaldehyde Resin Adhesives at Various Melamine Contents for Bonding Glued Laminated Timber Under High Frequency Heating, Journal of the Korean Wood Science and Technology, 45, 4, pp. 409-418, (2017)

← 1 2 3 →