Optimization design of secondary mirror for near space telescope

被引：0

作者：

Liu F. ^{[1
,2
]}

Li W. ^{[1
,2
]}

Zhao W. ^{[1
]}

Wang K. ^{[1
]}

Zhao H. ^{[1
]}

Lin G. ^{[1
]}

机构：

[1] Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, Changchun

[2] Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences, Beijing

来源：

Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering | 2021年 / 50卷 / 02期

关键词：

Ground structure optimization; Integrated optimization; Near space; Secondary mirror; Telescope;

D O I：

10.3788/IRLA20200178

中图分类号：

学科分类号：

摘要：

According to the requirements of high force-thermal stability and high performance of the near space ball-borne telescope, the design of the secondary mirror assembly was optimized. Although the near-space ball-borne telescope was not as harsh as the rocket launching mechanical environment, its unique flight process was affected by temperature changes and acceleration. At the same time, it had a strict quality requirement due to carry with balloon. Compared with the traditional mirror design method, the method of combining entity optimization and base structure optimization, integrated optimization was used to design the mirror, and introduced comprehensive evaluation factors to optimize the overall performance of the secondary mirror. The performance of the final secondary mirror assembly is good, indicating that the optimization method is effective. Through finite element simulation analysis, it is obtained that the secondary mirror assembly has a rigid body displacement of less than 3 μm, a surface accuracy better than λ/50 under the condition of gravity and temperature change of ±3 ℃. Under 0.02 mm assembly error, the shape accuracy is better than 1 nm. The first-order frequency of the secondary mirror assembly is 203.8 Hz. The 10 g acceleration stress response (35.4 MPa) is far less than the material yield stress. Using this method to optimize can obtain high force-thermal stability, high performance secondary mirror assembly. Copyright ©2021 Infrared and Laser Engineering. All rights reserved.

引用

共 10 条

[1] Liu Fengchang, Li Wei, Zhao Weiguo, Et al., Overview and developing trends of balloon-borne telescopes in near-space, Laser & Infrared, 49, 11, pp. 1275-1281, (2019)
[2] Kremic T, Cheng A F, Hibbitts K, Et al., Stratospheric balloons for planetary science and the Balloon Observation Platform for Planetary Science (BOPPS) mission summary, Aerospace Conference, pp. 1-10, (2015)
[3] Barthol P, Solanki S K, Schussler M, Et al., The sunrise mission, Solar Physics, 268, 1, pp. 1-34, (2011)
[4] Shoji Y, Taguchi M, Nakano T, Et al., FUJIN-2: Balloon borne telescope for optical observation of planets, Transactions of the Japan Society for Aeronautical and Space Sciences, Aerospace Technology Japan, 14, 30, pp. 95-102, (2016)
[5] Erickson E F, Honaker M A, Brivkalns C A, Et al., Backup secondary mirror and mechanism for SOFIA, 5489, (2004)
[6] Meng Qingyu, He Fei, Zhao Weiguo, Et al., The overview of the planetary atmospheric spectral telescope (past) in the scientific experimental system in near-space (sense), ISPRS Geospatial Week, 2019, (2019)
[7] Bao Qihong, Sha Wei, Chen Changzheng, Et al., Characteristics of rear support in centre for space SiC mirror, Acta Photonica Sinica, 46, 2, (2017)
[8] Liu Shutian, Hu Rui, Zhou Ping, Et al., Topologic optimization for configuration design of web-skon-type ground structure based large-aperture space mirror, Optics and Precision Engineering, 21, 7, pp. 1803-1810, (2013)
[9] Bao Qihong, Sha Wei, Chen Changzheng, Et al., Lightweight and optimization design of rectangular reflective mirror supported in centre, Infrared and Laser Engineering, 46, 7, (2017)
[10] Zhang Yongqiang, Liu Zhaohui, Li Zhiguo, Et al., Optimum structural design for collimation frame of space-based two-dimensional turntable, Infrared and Laser Engineering, 46, S1, (2017)

← 1 →