Influence of heat input on the characteristics and properties of aisi 316 and aisi 316l steels weld beads

被引：0
作者：
Silva R.S. [1 ]
Demarque R. [2 ]
Dos Santos E. [1 ]
de Castro J.A. [1 ]
机构：
[1] Universidade Federal Fluminense – UFF, Departamento de EngenhariaMetalúrgica, Volta Redonda, RJ
[2] Universidade Federal do Rio de Janeiro – UFRJ, Departamento de EngenhariaMecânica, Macaé, RJ
来源：
Soldagem e Inspecao | 2020年 / 25卷
关键词：
Austenitic stainless steels; Autogenous TIG Process; Computational modeling; Weldability;
D O I：
10.1590/0104-9224/si25.04
中图分类号：
学科分类号：
摘要：
AISI 316 and AISI 316L steels have wide industrial application, so the importance of evaluating the weldability of these alloys. In this study, comparative analysis was made between the samples of both welded steels with heat inputs of 0.5, 1.5 and 2.5 kJ/mm using autogenous TIG process. The variation of heat input on weld bead morphology, the spacing between δ ferrite bands, the volumetric fraction of ferrite δ and the microhardness in the molted zone were analyzed. The results showed that the dimensions of the welding metal, the spacing between ferrite bands and the volumetric fraction of ferrite δ become larger with the increase of the heat input. The welded samples of AISI 316L steel presented larger ferrite band spacing and larger δ ferrite fractions than AISI 316 steel. As for microhardness, the study showed that the closer to the center of the molted zone, the greater the microhardness value and the hardness of AISI 316 steel higher than that of AISI 316L steel. Through computational modeling it was possible to evaluate the temperature distribution along the welded plates and compare the thermal cycle obtained by simulation with the experimentally calculated cycle for the input of 0.5 kJ/mm. © 2020, Universidade Federal de Uberlandia. All rights reserved.
引用
收藏
相关论文
共 19 条
  • [1] McGuire M.F., Stainless Steels for Design Engineers, (2008)
  • [2] Costanza G., Sili A., Tata M.E., Weldability of austenitic stainless steel by metal arc welding with different shielding gas, 21st European Conference on Fracture, Procedia Structural Integrity, 2, pp. 3508-3514, (2016)
  • [3] Balram Y., Vishu Vardhan T., Sridhar Babu B., Venkat Ramana G., Preethi C., Thermal stress analysis of AISI 316 stainless steels weldments in TIG and pulse TIG welding processes, Materials Today: Proceedings, 19, 2, pp. 182-187, (2019)
  • [4] Samanta S.K., Mitra S.K., Pal T.K., Effect of rare earth elements on microstructure and oxidation behaviour in TIG weldments of AISI 316L stainless steel, Materials Science and Engineering A, 430, 1, pp. 242-247, (2006)
  • [5] Almeida D.F., Martins R.F., Cardoso J.B., Numerical simulation of residual stresses induced by TIG butt-welding of thin plates made of AISI 316L stainless steel, Procedia Structural Integrity, 5, pp. 633-639, (2017)
  • [6] Goldak J., Chakravarti A., Bibby M., A new finite element model for welding heat sources, Metallurgical Transactions B, 15, 2, pp. 299-305, (1984)
  • [7] Xavier C.R., Simulaçãonumérica Da Soldabilidade Dos açosferríticos T/P23 E T/P24 [dissertação De Mestrado], (2009)
  • [8] Ronda J., Oliver G.J., Consistent thermo-mechano-metallurgical model of welded stell with unified approach to derivation of phase evolution laws and transformation-induced plasticity, Computer Methods in Applied Mechanics and Engineering, 189, 2, pp. 361-418, (2000)
  • [9] Santos E.P., Estudocomparativo Das transformaçõesmicroestruturais E Termometalurgicas De Juntas Soldadas Dos açosinoxidáveis AISI 316 E AISI 316L Peloprocesso TIG autógeno [dissertação De Mestrado]., (2017)
  • [10] Modenesi P.J., Marques P.V., Santos D.B., Introdução à Metalurgia Da Soldagem, (2012)
12