Visual study of fluid flow in rotating packed bed reactors: a review

被引：0

作者：

Liu Y. ^{[1
]}

Wu W. ^{[1
]}

Luo Y. ^{[1
]}

Chu G. ^{[1
]}

Zou H. ^{[1
]}

Chen J. ^{[1
]}

机构：

[1] Research Center of the Ministry of Education for High Gravity Engineering and Technology, College of Chemical Engineering, Beijing University of Chemical Technology, Beijing

来源：

Huagong Xuebao/CIESC Journal | 2019年 / 70卷 / 10期

关键词：

Computational fluid dynamics; Fluid flow; Rotating packed bed; Visual study;

D O I：

10.11949/0438-1157.20190614

中图分类号：

学科分类号：

摘要：

The rotating packed bed (RPB) reactor is a typical process strengthening device, which has an active effect on the mass transfer and mixing process. The fluid flow behavior as one of the most fundamental property in a rotating packed bed reactor is essential to the study and optimization of the RPB reactor. Optical imaging technology and numerical simulation have been developed rapidly in recent years as important means to study hydrodynamic characteristics in RPB reactors. In this work, the visualization researches of RPB reactor in recent 30 years have been reviewed. The visualization research of RPB gradually develops from the surface of the packing zone to the inside of the packing zone. Up to now, the fluid flow in the packing and cavity zones can be described, but the simulation of mass transfer and mixing processes and accurate visual experiment still need to be developed deeply. © All Right Reserved.

引用

页码：3663 / 3676

页数：13

共 50 条

[1] Liu Y., Luo Y., Chu G.W., Et al., 3D numerical simulation of a rotating packed bed with structured stainless steel wire mesh packing, Chemical Engineering Science, 170, pp. 365-377, (2017)
[2] Liu H.S., Lin C.C., Wu S.C., Et al., Characteristics of a rotating packed bed, Industrial & Engineering Chemistry Research, 35, 10, pp. 3590-3596, (1996)
[3] Rao D.P., Bhowal A., Goswami P.S., Process intensification in rotating packed beds (HIGEE): an appraisal, Industrial & Engineering Chemistry Research, 43, 4, pp. 1150-1162, (2004)
[4] Yang H.J., Chu G.W., Zhang J.W., Et al., Micromixing efficiency in a rotating packed bed: experiments and simulation, Industrial & Engineering Chemistry Research, 44, 20, pp. 7730-7737, (2005)
[5] Luo Y., Chu G.W., Zou H.K., Et al., Gas-liquid effective interfacial area in a rotating packed bed, Industrial & Engineering Chemistry Research, 51, 50, pp. 16320-16325, (2012)
[6] Wenzel D., Gorak A., Review and analysis of micromixing in rotating packed beds, Chemical Engineering Journal, 345, pp. 492-506, (2018)
[7] Oko E., Ramshaw C., Wang M., Study of absorber intercooling in solvent-based CO<sub>2</sub> capture based on rotating packed bed technology, Energy Procedia, 142, pp. 3511-3516, (2017)
[8] Sun B., Sheng M., Gao W., Et al., Absorption of nitrogen oxides into sodium hydroxide solution in a rotating packed bed with preoxidation by ozone, Energy & Fuels, 31, 10, pp. 11019-11025, (2017)
[9] Zhang L., Wu S., Liang Z., Et al., Hydrogen sulfide removal by catalytic oxidative absorption method using rotating packed bed reactor, Chinese Journal of Chemical Engineering, 25, 2, pp. 175-179, (2017)
[10] Zou H., Sheng M., Sun X., Et al., Removal of hydrogen sulfide from coke oven gas by catalytic oxidative absorption in a rotating packed bed, Fuel, 204, pp. 47-53, (2017)

← 1 2 3 4 5 →