Natural frequency of bending vibration for stepped beam of different geometrical characters and materials

被引：3

作者：

Li S.-C. ^{[1
]}

Liang L. ^{[2
]}

Yu Q. ^{[2
]}

机构：

[1] JSNU-SPBPU Institute of Engineering, Jiangsu Normal University, Xuzhou

[2] School of Mechanical & Electrical Engineering, Jiangsu Normal University, Xuzhou

来源：

Noise and Vibration Worldwide | 2019年 / 50卷 / 01期

基金：

中国国家自然科学基金;

关键词：

bending vibration; Mathcad software; method of separating variable; natural frequency; Stepped beam;

D O I：

10.1177/0957456518812800

中图分类号：

学科分类号：

摘要：

Based on the bending vibration theory of the beam with equal cross-sectional area, the free bending vibration equation of each subsection of stepped beam is given. The modal function of the stepped beam is assumed by the method of separating variable. First, substitute the modal function into free vibration equation so as to obtain the corresponding vibration shape function and then the modal solution with undetermined coefficients and natural frequency is developed. Next, substitute the modal solution into the boundary condition and the continuity condition to get the corresponding equations. Solving the equations by elimination method, the frequency equation of the step beam is obtained by the condition that the system of linear equations has non-zero solution. Taking the cantilever step beam and simplified supported step beam as examples, the first-order natural frequency of transverse bending vibration of stepped beams with different cross-sectional shapes, different materials, different areas, and different lengths for the two portions was obtained by solving the frequency equation with Mathcad software, and the corresponding curves of natural frequency for the circular and rectangular cross-section beam have been given. © The Author(s) 2018.

引用

页码：3 / 12

页数：9

共 20 条

[1]

Yan H., Su X.Z., Liu M.Q., Study on structure and hydrodynamic characteristics of step piston for improving self-suction capacity of diaphragm dosing pump, Water Pump Technol, 1, pp. 19-22, (2013)

[2]

Zhu B.K., The analysis and calculation of the inherent frequency of longitudinal vibration of rod string, Oil Field Equip, 36, pp. 11-14, (2007)

[3]

Wang W.L., Hu Q.A., Liu H.W., Analysis on longitudinal vibration of drill string and the corresponding application, J Vib Shock, 30, pp. 229-233, (2011)

[4]

Li S.C., Zhang Q., Study on time-varying characteristics of longitudinal natural frequency for turning work-piece, Chin J Appl Mech, 31, pp. 808-814, (2014)

[5]

Li S.C., Zhang Q., Wu M.M., Research on time-varying characteristics of torsion vibration mode for cutting workpiece, Modern Manuf Eng, 9, pp. 99-103, (2016)

[6]

Yin X.C., Vibration Theory and Measure Technology, (2007)

[7]

Naguleswaran S., Vibration of an Euler–Bernoulli beam on elastic end supports and with up to three step changes in cross-section, Int J Mech Sci, 44, pp. 2541-2555, (2002)

[8]

Mao Q., Pietrzko S., Free vibration analysis of stepped beams by using Adomian decomposition method, Appl Math Comput, 217, pp. 3429-3441, (2010)

[9]

Mao Q., Free vibration analysis of multiple-stepped beams by using Adomian decomposition method, Math Comput Model, 54, pp. 756-764, (2011)

[10]

Attar M., A transfer matrix method for free vibration analysis and crack identification of stepped beams with multiple edge cracks and different boundary conditions, Int J Mech Sci, 57, pp. 19-33, (2012)

← 1 2 →