Effect of Hydride on Fracture Behavior of Zirconium Alloy Platy Welds

被引：0

作者：

Wang B. ^{[1
]}

Bao C. ^{[1
]}

Wei L. ^{[2
]}

He G. ^{[1
]}

机构：

[1] School of Mechanics and Engineering, Southwest Jiaotong University, Chengdu

[2] Science and Technology on Reactor Fuel and Material Laboratory, Nuclear Power Institute of China, Chengdu

来源：

| 1600年 / Chinese Mechanical Engineering Society卷 / 57期

关键词：

Fracture toughness; Hydrogen corrosion; Small sample; Weld; Zirconium alloy;

D O I：

10.3901/JME.2021.20.133

中图分类号：

学科分类号：

摘要：

Zirconium alloys are widely used in reactor fuel tube cladding, it is very important to evaluate the mechanical integrity of zirconium alloys when their mechanical properties change in service. Fracture toughness test method of small zirconium alloy platy welds was established based on small size three-point bending sample. The quasi-static fracture toughness tests of hydrogenated zirconium alloy welds at room temperature and 360 ℃ were carried out. The influence of hydrogen corrosion and temperature on fracture performance of zirconium alloy welds was analyzed. The results show that hydrogen corrosion and temperature can significantly affect the fracture properties of zirconium alloy welds. The fracture toughness of hydrogenated zirconium alloy welds at 360 ℃ enhances evidently compared with that at room temperature because of the dissolution of the hydrides distributed around crack tip. © 2021 Journal of Mechanical Engineering.

引用

页码：133 / 140

页数：7

共 20 条

[1]

YANG Fanglin, ZHANG Jianjun, SONG Qizhong, Study on hydrogen absorption of Zirconium tubes in lithum hydroxide solution, Rare Metal, 19, 3, pp. 58-63, (1999)

[2]

TANG Rui, YANG Xiaoxue, Solid solubility of hydrogen in N18, Zry-4 and M5 zirconium alloys, Chinese Journal of Materials Research, 23, 6, pp. 77-81, (2009)

[3]

STEINBRUECK M, VESHCHUNOV M S, BOLDYREV A V, Et al., Oxidation of B<sub>4</sub>C by steam at high temperatures: New experiments and modelling, Nuclear Engineering and Design, 237, 2, pp. 161-181, (2007)

[4]

ZHOU Jun, LI Zhongkui, ZHANG Jianjun, Et al., Mechanical properties of new zirconium alloy(N22) with different hydrogen content, Rare Metal Materials and Engineering, 12, pp. 179-183, (2008)

[5]

WANG Ruihong, DING Xiangdong, XIAO Lin, Et al., Mechanical properties and finite simulation of Zr-4 alloy plate before and after hydrogenation, Transaction of Nonferrous Metals Society of China, 12, 3, pp. 544-549, (2002)

[6]

WANG Ruihong, DING Xiangdong, LIU Gang, Et al., Numerical analysis of deformation behavior of Zr-4 alloy, Rare Metal Materials and Engineering, 6, 12, pp. 156-160, (2003)

[7]

LIU Xiao, WANG Li, BAO Chen, Et al., Study on fracture behaviour of zirconium alloy cladding tubes containing axial symmetric cracks, Journal of Mechanical Engineering, 55, 16, pp. 76-85, (2019)

[8]

JIA Qi, CAI Lixun, BAO Chen, Et al., Monotonic tensile and low cycle fatigue tests of zirconium thin walled tubes, Atomic Technology, 44, 6, pp. 712-717, (2010)

[9]

SUN Chao, TAN Jun, YING Shihao, Et al., Study on the critical temperature of delayed crack induced by hydrogen in N18 zirconium alloys, Acta Metallurgica Sinica, 45, 5, pp. 541-546, (2009)

[10]

HSU H H, TSAY L W., Effect of hydride orientation on fracture toughness of Zircaloy-4 cladding, Journal of Nuclear Materials, 408, 1, pp. 67-72, (2011)

← 1 2 →