Experimental investigation on axial compression behavior of RC columns strengthened with HDC and RPC jackets

被引：0
|
作者：
Deng M.-K. [1 ,2 ]
Li R.-Z. [1 ]
Zhang Y.-X. [1 ,2 ]
机构：
[1] School of Civil Engineering, Xi'an University of Architecture & Technology, Xi'an
[2] Key Lab of Structural Engineering and Earthquake Resistance, Ministry of Education (XAUAT), Xi'an
来源：
Gongcheng Lixue/Engineering Mechanics | 2020年 / 37卷 / 09期
关键词：
Axial compression test; Bearing cpacity; High ductile concrete; Reactive powder concrete; Strengthen;
D O I：
10.6052/j.issn.1000-4750.2019.01.0045
中图分类号：
学科分类号：
摘要：
In order to study the axial compressive behavior of reinforced concrete (RC) columns strengthened with high ductile concrete (HDC) and reactive powder concrete (RPC) jackets. Eight RC square columns were prepared; four of them were jacketed with HDC, three with RPC and one control specimen. Axial compression tests were carried out to investigate the influence of the material types, the loaded ways and the reinforcement arrangements of the jackets on test results. The failure modes, bearing capacity, load-displacement curves and strain development of specimens are analyzed. Test results show that the failure modes of strengthened columns have been improved. The jackets reinforced with steel mesh exhibit good integrity. The interface between jacket and concrete has reliable bond strength. Thusly, the bearing capacity and deformation capacity of all strengthened specimens have been improved. The bearing capacity of strengthened specimens is increased greatly, whose jackets are directly loaded. Based on the analysis of the strengthening mechanism of jackets, the formulas for calculating the bearing capacity of the strengthened specimens is developed, in which the stress lag of jackets is considered. And the calculating results are in a good agreement with the experimental results. Copyright ©2020 Engineering Mechanics. All rights reserved.
引用
收藏
页码：74 / 83
页数：9
相关论文
共 30 条
  • [1] Code for design of strengthening concrete structure, (2013)
  • [2] Wan Moli, Han Jiyun, Concrete structure reinforcement technique, pp. 88-135, (1995)
  • [3] Vandoros K G, Dritsos S E., Concrete jacket construction detail effectiveness when strengthening RC columns [J], Construction and Building Materials, 22, 3, pp. 264-276, (2008)
  • [4] Peng Xuanchang, Experimental study on reinforced concrete column strengthened by angle steels, Industrial Construction, 23, 1, pp. 45-59, (1993)
  • [5] Rosario M, Vincenzo P., Reinforced concrete columns strengthened with angles and battens subjected to eccentric load [J], Engineering Structures, 31, 2, pp. 539-550, (2008)
  • [6] Ribeiro F, Sena-Cruz J, Branco F G, Et al., Hybrid FRP jacketing for enhanced confinement of circular concrete columns in compression [J], Construction and Building Materials, 184, pp. 681-704, (2018)
  • [7] Harajli M H, Dagher F., Seismic strengthening of bond critical regions in rectangular reinforced concrete columns using fiber-reinforced polymer wraps [J], ACI Structural Journal, 105, 1, pp. 68-77, (2008)
  • [8] Deng Mingke, Liu Haibo, Qin Meng, Et al., Experimental research on compressive toughness of the high ductile fiber reinforced concrete, Journal of Xi'an University of Architecture & Technology (Natural Science Edition), 47, 5, pp. 660-665, (2015)
  • [9] Deng Mingke, Jing Wubin, Qin Meng, Et al., Experimental research on compressive strength of high ductility fiber reinforced concrete, Building Structure, 46, 23, pp. 79-84, (2016)
  • [10] Kou Jialiang, Deng Mingke, Liang Xingwen, Experimental study of uniaxial tensile properties of ductile fiber reinforced concrete, Building Structure, 43, 1, pp. 59-64, (2013)
123