Experimental investigation into performances of an active Whipple shield against hypervelocity impact

被引:0
|
作者
Wu Q. [1 ]
Zhang Q. [2 ]
Gong Z. [1 ]
Ren S. [2 ]
Liu H. [3 ]
机构
[1] Beijing Institute of Spacecraft Environment Engineering, Beijing
[2] State Key Laboratory of Explosion Science and Technology, Beijing Institute of Technology, Beijing
[3] Hypervelocity Aerodynamic Institute, China Aerodynamic Research and Development Center, Mianyang
来源
关键词
Active materials; Ballistic limit; Damage characteristics; Hypervelocity impact; Whipple shield;
D O I
10.11883/bzycj-2020-0266
中图分类号
学科分类号
摘要
With the continuous increase of centimeter-scale space debris, the exploration and design of new high-performance shields has become an urgent need. Based on the shield of active materials, the hypervelocity impact experiments with different projectile sizes and impact velocities were carried out by using a two-stage light gas gun. The image characteristics of debris clouds under different impact conditions were obtained and analyzed by laser shadowgraph photography. The damage characteristics of the rear wall of the active Whipple shield were studied. Through the statistical analysis of the number of craters, the influences of active materials on the fragmentation of projectiles under different impact velocities were obtained. Compared with the classical Christiansen ballistic limit equation, the protective performance of energetic active material shield was obtained, and the ballistic limit curve of the new shield was fitted. Analysis suggests that shock initiation characteristics of active materials under impact enhanced the shield performance. When impacted by the space debris, active material shield firstly uses its mechanical strength for primary crushing. During this process, the energetic material shield has an explosive reaction with an instantaneous temperature being as high as 3 800 K, which can promote fragmentation, melting and reduce the size of the space debris. At the same time, the explosion products with high temperature, pressure and high speed motion produce a negative acceleration to the projectile fragments, reducing the axial kinetic energy. The explosion products of the active materials are mostly gaseous, which greatly reduce the number of the fragments with penetration ability in the debris cloud. The penetration failure of the rear plate only comes from the fragments generated by the fragmentation of the projectile. Under the combined action of impact and explosion, the active materials shield can not only fully break and decelerate space debris, but also greatly reduce the number of solid debris in debris cloud, thereby produce a sharp rise in the spacecraft protection ability, and the maximum protection ability can be increased by 45% when the velocity is 2.31 km/s. © 2021, Editorial Staff of EXPLOSION AND SHOCK WAVES. All right reserved.
引用
收藏
相关论文
共 17 条
  • [1] GONG Z Z, ZHAO Q Y, LI M, Et al., The frontier problem and prospect of space debris protection research, Space Debris Research, 19, 3, pp. 2-13, (2019)
  • [2] COUR-PALAIS B G, CREW J L., A multi-shock concept for spacecraft shielding, International Journal of Impact Engineering, 10, pp. 135-146, (1990)
  • [3] CHRISTIANSEN E L, KERR J H., Mesh double-bumper shield: a low-weight alternative for spacecraft meteoroid and orbital debris protection, International Journal of Impact Engineering, 14, pp. 169-180, (1993)
  • [4] CHRISTIANSEN E L, CREWS J L, WILLIAMSEN J E, Et al., Enhanced meteoroid and orbital debris shielding, International Journal of Impact Engineering, 17, pp. 217-228, (1995)
  • [5] CHRISTIANSEN E L, KERR J H, DE LA FUENTE H M, Et al., Flexible and deployable meteoroid/debris shielding for spacecraft, International Journal of Impact Engineering, 23, 11, pp. 125-136, (1999)
  • [6] JIA G Z, HA Y, PANG B J, Et al., Ballistic limit and damage properties of basalt/Kevlar stuffed shield, Explosion and Shock Waves, 36, 4, pp. 433-440, (2016)
  • [7] WANG Y D, FENG C X, SONG Y C, Et al., Study on process of continuous sic fibers, Aerospace Materials & Technology, 2, pp. 21-25, (1997)
  • [8] HOU M Q, GONG Z Z, XU K B, Et al., Numerical study on hypervelocity impact mechanism of Al/Mg wave impedance-grade material, Spacecraft Environment Engineering, 30, 6, pp. 581-585, (2013)
  • [9] ZHANG X F, SHI A S, QIAO L, Et al., Experimental study on impact-initiated characters of multifunctional energetic structural materials [J], Journal of Applied Physics, 113, 8, (2013)
  • [10] WANG H, ZHENG Y, YU Q, Et al., Impact-induced initiation and energy release behavior of reactive materials [J], Journal of Applied Physics, 110, 7, (2011)