Impact of using n-pentanol as a co-solvent with diesel-methanol blends on combustion, performance and emissions of CI engine

被引：0

作者：

Vishnoi P.K. ^{[1
]}

Gautam P.S. ^{[1
]}

Gupta V.K. ^{[1
]}

机构：

[1] Department of Mechanical Engineering College of Technology, Internal Combustion Engine Laboratory, Uttarakhand

来源：

International Journal of Ambient Energy | 2022年 / 43卷 / 01期

关键词：

combustion characteristics; diesel engine; emission characteristics; Higher alcohols; performance;

D O I：

10.1080/01430750.2021.2013940

中图分类号：

学科分类号：

摘要：

Pentanol or n-pentanol is a strong contender that increases the phase stability of the diesel-methanol blends. In the current study, n-pentanol is used as a co-solvent to avoid the phase separation of diesel-methanol blends. The combustion, performance and emission characteristics of the diesel engine are evaluated at different loads using diesel/methanol/n-pentanol blends. The results indicate the novelty of MnP15 fuel blend, among all the test fuel blends with appreciable highest peak cylinder pressure, heat release rate and brake thermal efficiency at full load condition. Furthermore, HC, NOx and smoke emissions for MnP15 reduced by 34.61%, 3.98% and 41.29% respectively, at full load when compared to diesel. The study also reveals that fuel blend MnP25 cannot be used as CI engine fuel due to its poor combustion and performance. However, MnP blends up to 20% can be used in unmodified CI engine and MnP15 may be recommended as CI engine fuel. © 2022 Informa UK Limited, trading as Taylor & Francis Group.

引用

页码：6297 / 6306

页数：9

共 46 条

[1]

Agarwal A.K., Biofuels (Alcohols and Biodiesel) Applications as Fuels for Internal Combustion Engines, Progress in Energy and Combustion Science, 33, pp. 233-271, (2007)

[2]

Agarwal A.K., Gautam A., Sharma N., Singh A.P., Methanol and the Alternate Fuel Economy, (2019)

[3]

Agarwal A.K., Sharma N., Singh A.P., Kumar V., Satsangi D.P., Patel C., Adaptation of Methanol-Dodecanol-Diesel Blend in Diesel Genset Engine, Journal of Energy Resources Technology, Transactions of the ASME, 141, (2019)

[4]

Atmanli A., Yilmaz N., A Comparative Analysis of n-Butanol/Diesel and 1-Pentanol/Diesel Blends in a Compression Ignition Engine, Fuel, 234, pp. 161-169, (2018)

[5]

Atmanli A., Yilmaz N., An Experimental Assessment on Semi-Low Temperature Combustion Using Waste Oil Biodiesel/C3–C5 Alcohol Blends in a Diesel Engine, Fuel, 260, (2020)

[6]

Bayraktar H., An Experimental Study on the Performance Parameters of an Experimental CI Engine Fueled with Diesel-Methanol-Dodecanol Blends, Fuel, 87, 2, pp. 158-164, (2008)

[7]

Canakci M., Sayin C., Ozsezen A.N., Turkcan A., Effect of Injection Pressure on the Combustion, Performance, and Emission Characteristics of a Diesel Engine Fueled with Methanol-Blended Diesel Fuel, Energy and Fuels, 23, 6, pp. 2908-2920, (2009)

[8]

Chen H., Su X., He J., Xie B., Investigation on Combustion and Emission Characteristics of a Common Rail Diesel Engine Fueled with Diesel/n-Pentanol/Methanol Blends, Energy, 167, pp. 297-311, (2019)

[9]

El-Seesy A.I., El-Zoheiry R.M., Fouad A.K., Hussien A.M., Elshabrawy S.O.M., He Z., Nasser A., Impacts of Octanol and Decanol Addition on the Solubility of Methanol/Hydrous Methanol/Diesel/Biodiesel/Jet A-1 Fuel Ternary Mixtures, RSC Advances, 11, 30, pp. 18213-18224, (2021)

[10]

EL-Seesy A.I., Kayatas Z., Takayama R., He Z., Kandasamy S., Kosaka H., Combustion and Emission Characteristics of RCEM and Common Rail Diesel Engine Working with Diesel Fuel and Ethanol/Hydrous Ethanol Injected in the Intake and Exhaust Port: Assessment and Comparison, Energy Conversion and Management, 205, (2020)

← 1 2 3 4 5 →