Dynamic Constitutive Model and Numerical Simulation of S32760 Duplex Stainless Steel Based on Dislocation Theory

被引：0
作者：
Yang L. [1 ,2 ]
Zhang H. [1 ]
Zheng M. [1 ]
Zhang X. [1 ]
Liu J. [1 ]
Liu Y. [3 ]
Gong F. [1 ]
机构：
[1] Key Laboratory of Advanced Manufacturing and Intelligent Technology, Ministry of Education, Harbin University of Science and Technology, Harbin
[2] Qiqihar Heavy CNC Equipment Co.,Ltd., Qiqihar
[3] School of Mechanical and Electrical Engineering, Qiqihar University, Qiqihar
来源：
Recent Patents on Mechanical Engineering | 2024年 / 17卷 / 02期
关键词：
constitutive model; Dislocation dynamics; duplex stainless stee; high strain rate; hybrid optimization algorithm; S32760;
D O I：
10.2174/0122127976270648231113074331
中图分类号：
学科分类号：
摘要：
Background: To describe the complex mechanical behavior of S32760 duplex stainless steel under high strain rate and high-temperature loading conditions. Objective: The constitutive model of S32760 duplex stainless steel suitable for high strain rate was constructed from the micro-scale. Methods: Based on the theory of dislocation dynamics, the effects of different strain rates and strains on the plastic deformation of ferrite and austenite were analyzed, and the thermal stress term and non-thermal stress term of ferrite and austenite phases were coupled. Results: The simulation results of the model show that the S32760 dual-phase constitutive model has a high degree of fit with the experimental data at high strain rates. Conclusion: Compared with the classical J-C model, the results show that the constitutive model of this patent has more accurate predictability than the J-C model in describing the mechanical behavior of duplex stainless steel in the high strain range of 5000s-1 to 10000s-1. © 2024 Bentham Science Publishers.
引用
收藏
页码：105 / 115
页数：10
相关论文
共 32 条
  • [1] Huang JH., Duplex stainless steel for pressure vessels, Press Vessel, 32, 2, pp. 1-14, (2015)
  • [2] Wang B, Liu Z., Investigations on deformation and fracture behavior of workpiece material during high speed machining of 7050-T7451 aluminum alloy, CIRO J Manuf Sci Technol, 14, pp. 43-54, (2016)
  • [3] Yan QS, Sun B, Yang L., Study on dynamic mechanical behavior of structural stainless steel at elevated temperature and high strain rate, J Huazhong Univ Sci Technol, 47, pp. 128-132, (2019)
  • [4] Ran QX., Phase transformation-induced strain-rate dependence effect in economical transformation-induced plasticity-aided duplex stainless steel, J Mater Eng Perform, 31, pp. 5063-5069, (2022)
  • [5] Shucai Z, Hongchun Z, Degang L, Et al., Research on precipitation kinetics of super austenitic stainless steel with high Mo and N, Mech Mater, 687-691, pp. 4197-4201, (2014)
  • [6] Li L, Shuai MR, Li HB, Wang JM, Zhang M, Wang JH., Constitutive model and hot working parameters optimization of 2209 duplex stainless steel, Precis Form Eng, 14, pp. 48-54, (2022)
  • [7] Kui CF, Fei LY, Xue XJ, Et al., The dynamic characteristics and constitutive model of 1020 steel, Emerg Mater Res, 6, 1, pp. 124-131, (2017)
  • [8] Fu B, Yang WY, Li LF, Zhao ZY., Effect of transformation behavior of retained austenite on mechanical properties of cold-rolled TRIP steel, Trans Mater Heat Treat, 38, 12, pp. 63-69, (2017)
  • [9] Wang L, Yu H, Lee Y, Kim H-W., Hot tensile deformation behavior of twin roll casted 7075 aluminum alloy, Met Mater Int, 21, 5, pp. 832-841, (2015)
  • [10] Daridon L, Oussouaddi O, Ahzi S., Influence of the material constitutive models on the adiabatic shear band spacing: MTS, power law and Johnson–Cook models, Int J Solids Struct, 41, 11-12, pp. 3109-3124, (2004)
1234