EXPERIMENTAL AND ANALYTICAL STUDY ON ULTIMATE PROPERTY OF RUBBER BEARINGS (PART 2): PROPOSAL OF FLARE-LIKE STRUCTURE OF RUBBER BEARINGS AND THEORETICAL AND ANALYTICAL STUDY ON ULTIMATE PROPERTY OF HIGH-DAMPING RUBBER BEARINGS WITH PROPOSED STRUCTURE

被引:0
作者
Mori T.
Kato H.
Tani Y.
Nakamura M.
Murota N.
Takeuchi S.
机构
来源
Journal of Structural and Construction Engineering | 2023年 / 88卷 / 812期
关键词
Finite element analysis; Flare-like structure; High-damping rubber bearing; Second shape factor; Seismically isolated structure; Ultimate property;
D O I
10.3130/aijs.88.1429
中图分类号
学科分类号
摘要
As second shape factor of rubber bearings is small, buckling strain is decrease. In this study, new flare-like structure in order to improve buckling property is proposed. In the conventional structure of rubber bearings, outer diameter of inner rubber is uniform for all layers. In the proposed flare-like structure, outer diameter is not uniform and the diameter of upper and lower layer is larger than that of center layer. First, outline of flare-like structure is introduced. Second, improvement of ultimate properties by flare-like structure is proved theoretically. Third, buckling properties improvement is proved based on finite element analysis. © 2023 Architectural Institute of Japan. All rights reserved.
引用
收藏
页码:1429 / 1440
页数:11
相关论文
共 13 条
[11]  
Nishimura I., Suzuki S., Toyoshima M., Kanno K, AN EXPERIMENTAL STUDY ON THE BUCKLING STABILITY OF LAMINATED RUBBER BEARINGS UNDER LARGE DEFORMATION, Journal of Structural and Construction Engineering (Transactions of AIJ), 81, 721, pp. 495-504, (2016)
[12]  
Yamamoto M., Minewaki S., Yoneda H., Higashino M., FULL-SCALE TESTS AND ANALYTICAL MODEL OF HIGH-DAMPING RUBBER BEARINGS USING TWO HORIZONTAL DIRECTIONAL LOADING, Journal of Structural and Construction Engineering (Transactions of AIJ), 74, 638, pp. 639-645, (2009)
[13]  
Kato H., Mori T., Murota N., Suzuki S., Minewaki S., Yamamoto M., Yoneda H., Higashino M., AN EXPERIMENTAL AND ANALYTICAL STUDY ON ULTIMATE PROPERTIES OF SEISMIC RUBBER BEARINGS UNDER HORIZONTAL BIAXIAL LOADING, AIJ Journal of Technology and Design, 16, 32, pp. 167-172, (2010)