Microstructure and Tribological Properties in Atmosphere of WS x /Ni/a-C/Ni Multilayer Films Deposited by Sputtering

被引：0
|
作者：
Yang F. [1 ]
Wang G. [1 ]
Gong R. [1 ]
Liu T. [1 ]
Zheng X. [1 ]
机构：
[1] College of Materials Science and Engineering, Zhejiang University of Technology, Hangzhou, 310014, Zhejiang
来源：
Mocaxue Xuebao/Tribology | 2019年 / 39卷 / 01期
关键词：
A-C; Magnetron sputtering; Multilayer film; Ni; Tribological property; WS [!sub]2[!/sub;
D O I：
10.16078/j.tribology.2018118
中图分类号：
学科分类号：
摘要：
WS x /Ni/a-C/Ni multilayer films with different Ni layer thicknesses were successfully prepared by alternate depositing WS 2 , Ni and amorphous carbon (a-C) layer on silicon substrate with magnetron sputtering technique. The composition and microstructure of the films were investigated by using scanning electron microscopy, X-ray diffractometry, Raman spectroscopy and X-ray photoelectron spectroscopy. The mechanical and tribological properties of the films in air were evaluated by using nano-indentation tester, scratch tester and ball-on-disc tribotester. The results show that the density of WS x /Ni/a-C/Ni multilayer films decreased and the value of n s /n w (the atomic fraction ratio of S to W) dropped from 0.84 to 0.73 as increasing the Ni layer thickness, the WS 2 layer was microcrystalline or amorphous. With the increase of Ni layer thickness, the hardness and wear rate of the multilayer film decreased first and then increased, but the friction coefficient increased from 0.22 to 0.38, the adhesion increased first and then decreased. The multilayer film with Ni layer thickness of 6 nm exhibited the hardness of 13.4 GPa, the excellent antioxidant properties and the best wear resistance, wear rate is 9.47×10 -14 m 3 /(Nm). © 2019, Science Press. All right reserved.
引用
收藏
页码：82 / 89
页数：7
相关论文
共 37 条
  • [21] Chung J.W., Ohuchi F.S., Deposition of AlN on WS <sub>2</sub> (0001) substrate by atomic layer growth process , Materials Research Society, 449, pp. 379-384, (1997)
  • [22] Liu X.D., Zhang H.Y., Lu K., Et al., The lattice expansion in nanometre-sized Ni polycrystals, Journal of Physics Condensed Matter, 6, pp. L497-L502, (1994)
  • [23] Hu X., Yasaei P., Jokisaari J., Et al., Mapping thermal expansion coefficients in freestanding 2D materials at the nanometer scale, Physical Review Letters, 120, pp. 055902-055908, (2018)
  • [24] Nix F.C., Macnair D., The thermal expansion of pure metals: copper, gold, aluminum, nickel, and iron, Physical Review, 60, pp. 597-605, (1941)
  • [25] Cao H., Hosson J.T.M.D., Pei Y.T., Effect of carbon concentration and argon flow rate on the microstructure and triboperformance of magnetron sputtered WS <sub>2</sub> /a-C coatings , Surface and Coatings Technology, 332, pp. 141-152, (2017)
  • [26] Sarhammar E., Strandberg E., Sundberg J., Et al., Mechanisms for compositional variations of coatings sputtered from a WS <sub>2</sub> target , Surface and Coatings Technology, 252, 9, pp. 186-190, (2014)
  • [27] Liu J., Li W., Meng J., Et al., Study on microstructure and mechanical properties of CrAlN/WS <sub>2</sub> nanomultilayered films , Journal of Functional Materials, 47, 12, pp. 12118-12123, (2016)
  • [28] Lao J., Han Z., Tian J., Et al., Microstrcture and mechanical properties of PVD nickel thin film, China National Conference on Funtional Materials and Applications, 10, pp. 1553-1572, (2001)
  • [29] Goto Y., Taniguchi K., Omata T., Et al., Formation of Ni <sub>3</sub> C nanocrystals by thermolysis of nickel acetylacetonate in oleylamine: characterization using hard X-ray photoelectron spectroscopy , Chemistry of Materials, 20, 12, pp. 4156-4160, (2008)
  • [30] Du D., Liu D., Ye Z., Et al., Fretting wear and fretting fatigue behaviors of diamond-like carbon and graphite-like carbon films deposited on Ti-6Al-4V alloy, Applied Surface Science, 313, 9, pp. 462-469, (2014)
1234