Fabrication of durable self-cleaning photocatalytic coating with long-term effective natural light photocatalytic degradation performance

被引：6

作者：

Feng J. ^{[1
,2
]}

Feng Q. ^{[1
,2
]}

Xin J. ^{[1
]}

Liang Q. ^{[1
]}

Li X. ^{[1
,2
]}

Chen K. ^{[3
]}

Teng J. ^{[1
,2
]}

Wang S. ^{[1
,2
]}

Feng L. ^{[1
,2
]}

Liu J. ^{[1
,2
]}

机构：

[1] School of Resources, Environment and Materials, Guangxi University, No.100, Daxue East Road, Nanning

[2] Key Laboratory of Environmental Protection, Guangxi University, No.100, Daxue East Road, Nanning

[3] School of Materials and Environment, Guangxi Minzu University, Nanning

来源：

Chemosphere | 2023年 / 336卷

关键词：

Dye wastewater; Inorganic adhesive; Photocatalytic coating; Self-cleaning; TiO[!sub]2[!/sub;

D O I：

10.1016/j.chemosphere.2023.139316

中图分类号：

学科分类号：

摘要：

The practical application of photocatalytic coating has been greatly challenged in terms of its long-term effective natural light photocatalytic degradation due to its vulnerability and easy contamination caused by poor self-cleaning properties. In this work, photocatalytic coating with self-cleaning properties was prepared by spraying fluorinated dual-scale TiO2 on the inorganic lithium silicate adhesive, enabling excellent durability and long-term effective photocatalytic degradation performance under natural light. The coating exhibits superhydrophobic properties even after abrasion testing, acid and alkali immersion testing, and UV aging, laying a foundation for the practical use. Moreover, the coating can be applied to various substrates and its excellent self-cleaning properties make it resistant to particulate and liquid contamination that may occur in the environment. Besides, we evaluated the photocatalytic stability of the coating by subjecting it to acidic and alkaline environments and high pollution concentrations. Furthermore, benefiting from the synergistic effect of photocatalytic and self-cleaning properties, the coating achieves long-term effective photocatalytic degradation of dye wastewater under natural light, which still has a high removal rate of 95.8% for methylene blue even after 30 cycles of use. Meanwhile, due to the coating's excellent durability, the long-term quality loss rate of the coating still remained below 0.3%, which avoids the risk of secondary environmental pollution caused by nanoparticle leakage. Therefore, these excellent properties enable the coating to have a broad range of application prospects for the treatment of pollutants in water. © 2023 Elsevier Ltd

引用

共 62 条

[21]

Liu C., Qian X., Wei Q., Chen Z., Chen J., Wang W., Chen X., Gao J., Liu Y., Xie L., Construction of hydrostable cesium lead bromide-titania for visible-light degradation of tetracycline hydrochloride in water, J. Clean. Prod., 365, (2022)

[22]

Liu C., Qin Y., Guo W., Shi Y., Wang Z., Yu Y., Wu L., Visible-light-driven photocatalysis over nano-TiO2 with different morphologies: from morphology through active site to photocatalytic performance, Appl. Surf. Sci., 580, (2022)

[23]

Liu G., Xia H., Niu Y., Zhao X., Zhang G., Song L., Chen H., Fabrication of self-cleaning photocatalytic durable building coating based on WO3-TNs/PDMS and NO degradation performance, Chem. Eng. J., 409, (2021)

[24]

[25]

Liu G., Xia H., Zhang W., Lang L., Geng H., Song L., Niu Y., Photocatalytic superamphiphobic coatings and the effect of surface microstructures on superamphiphobicity, ACS Appl. Mater. Interfaces, 13, pp. 12509-12520, (2021)

[26]

Liu G., Xia H., Zhang W., Song L., Chen Q., Niu Y., Improvement mechanism of NO photocatalytic degradation performance of self-cleaning synergistic photocatalytic coating under high humidity, J. Hazard Mater., 418, (2021)

[27]

Liu H., Shon H.K., Sun X., Vigneswaran S., Nan H., Preparation and characterization of visible light responsive Fe2O3–TiO2 composites, Appl. Surf. Sci., 257, pp. 5813-5819, (2011)

[28]

Liu M., Hou Y., Li J., Tie L., Guo Z., An all-water-based system for robust superhydrophobic surfaces, J. Colloid Interface Sci., 519, pp. 130-136, (2018)

[29]

Liu M., Hou Y., Li J., Tie L., Peng Y., Guo Z., Inorganic adhesives for robust, self-healing, superhydrophobic surfaces, J. Mater. Chem., 5, pp. 19297-19305, (2017)

[30]

Liu M., Li J., Hou Y., Guo Z., Inorganic adhesives for robust superwetting surfaces, ACS Nano, 11, pp. 1113-1119, (2017)

← 1 2 3 4 5 6 7 →