Design of LiDAR optical machine system for airborne single frequency bathymetry

被引：9

作者：

Zhou G. ^{[1
,2
]}

Hu H. ^{[1
,3
]}

Xu J. ^{[1
,4
]}

Zhou X. ^{[1
,2
,3
]}

Nong X. ^{[5
]}

机构：

[1] Guangxi Key Laboratory of Spatial Information and Geomatics, Guilin University of Technology, Guilin

[2] School of Microelectronics, Tianjin University, Tianjin

[3] College of Mechanical and Control Engineering, Guilin University of Technology, Guilin

[4] College of Earth Sciences, Guilin University of Technology, Guilin

[5] 34 Research Institute of China Electronics Technology Group Corporation, Guilin

来源：

Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering | 2021年 / 50卷 / 04期

关键词：

Bathymetry; Kepler system; LiDAR; Opto-mechanical system; Unmanned Aerial Vehicle(UAV);

D O I：

10.3788/IRLA20200297

中图分类号：

学科分类号：

摘要：

LiDAR, as a kind of sounding and underwater terrain drawing equipment, has entered the commercial use stage abroad. In China, the development and application of LiDAR are relatively slow, and researchers mainly focused on the development of large-scale dual-frequency water measurement LiDAR. Based on the design of dual-frequency water measurement LiDAR, a single-frequency LiDAR opto-mechanical system for Unmanned Aerial Vehicle(UAV) was designed by author's team. Firstly, the system component was designed separately. Namely, a reflective optical wedge was used by a scanning unit to achieve transmission scanning, an optimal receiving angle of view was calculated by the Kopilevich model, and a receiver optical unit was designed with generalized Kepler system. Then, the whole machine was integrated, the efficiency of the optical system was calculated, and a simulation experiment was used to verify the scanning effect, a waveform test was used to verify the usability of the designed LiDAR. The characters of this system are as follows: the optimal receiving view angle is 95 mrad, the best flight altitude is 150 m, flying speed is 10 m/s, the best depth of measured water within 25 m, the maximum depth of measured water is 50 m. The Kopilevich model is used to determine the best LiDAR field of view to improve the performance of the LiDAR opto-mechanical system, two different scanning methods can be switched. Copyright ©2021 Infrared and Laser Engineering. All rights reserved.

引用

共 28 条

[1]

Li Qinghui, Chen Liangyi, Airborne blue green laser bathymetry, Acta Optica Sinica, 25, 11, pp. 1008-1015, (1996)

[2]

Li Kai, Zhang Yongsheng, Liu Xiaodi, Et al., Study on airborne laser bathymetric system receiver field of view, Acta Optica Sinica, 35, 7, pp. 40-48, (2015)

[3]

Qin Haiming, Wang Cheng, Xi Xiaohuan, Et al., Development of airborne laser bathymetric technology and applications, Remote Sensing Technology and Application, 31, 4, pp. 617-624, (2016)

[4]

Shu Lei, Design and hardware implementation of SAR flood image change detection algorithm based on FPGA [D], (2019)

[5]

Zhang Yuanyu, Huang Rongyong, Yu Kefu, Et al., Estimation of shallow water depth based on satellite hyperspectral images, Journal of Geo-Information Science, 22, 7, pp. 1567-1577, (2020)

[6]

Liu Y, Guo K, He X, Et al., Research progress of airborne laser bathymetry technology, Geomatics and Information Science of Wuhan University, 42, 9, pp. 1185-1194, (2017)

[7]

Hu Shanjiang, He Yan, Chen Weibiao, Et al., Design of airboren dual-frequency laser radar system, Infrared and Laser Engineering, 47, 9, (2018)

[8]

Guo Yulan, Wan Jianwei, Lu Min, Et al., Three dimensional orientation eatimation for ladar target, Optics and Precision Engineering, 20, 4, pp. 843-850, (2012)

[9]

Hu Feng, Hu Chunsheng, Wang Shengshu, Et al., Calibration of external relation between imaging laser radar and camera, Optics and Precision Engineering, 19, 4, pp. 938-943, (2011)

[10]

Qu Hengkuo, Zhang Qingyuan, Ruan Youtian, Laser radar based on scanning image tracking, Chinese Optics, 5, 3, pp. 242-247, (2012)

← 1 2 3 →