Analysis on Uniformity of Flow Field for the New Post-mixed Abrasive Water Jet Nozzle

被引：0

作者：

Liu G. ^{[1
]}

Yang Y. ^{[1
]}

Xu H. ^{[2
]}

Zhu D. ^{[1
]}

机构：

[1] School of Mechanical Engineering, University of Science and Technology Beijing, Beijing

[2] Nanjing Branch of Night Vision Technology, Nanjing

来源：

Hunan Daxue Xuebao/Journal of Hunan University Natural Sciences | 2020年 / 47卷 / 10期

关键词：

Abrasive water jet; Numerical simulation; Orthogonal test; Uniformity;

D O I：

10.16339/j.cnki.hdxbzkb.2020.10.007

中图分类号：

学科分类号：

摘要：

Aiming at the problem of flow field non-uniformity of the post-mixed abrasive nozzle at present,the FLUENT simulation software is used to calculate the internal flow field of a new type of post-mixed abrasive water jet nozzle. The influence of conical baffle on the uniformity of flow field is analyzed by comparing the internal flow fields with and without conical baffle. By analyzing the spray effect of tapered baffle nozzles with different parameters,the influence rule of different parameter structure of the new-type post-mixed abrasive water jet nozzles on the uniformity of internal flow field is obtained,so as to improve the mixing uniformity of water and abrasive in the post-mixed abrasive water jet nozzles. The results show that air pressure reduces and fluid collection is eliminated in mixing chamber when increasing the diameter of the shrinking outlet on precondition of assuring high outlet velocity. On this basis,the abrasive volume fraction of outlet is nearly 15% with the minimum fluctuation,the abrasive mixing uniformity is greatly improved when a cone baffle structure of quadric B-spline curve is added inside the nozzle and abrasive inlet leans toward axis of the nozzle at the angle of 45°. The effects of multi-parameters on the uniformity of the abrasive were analyzed by orthogonal test to obtain the optimal structural parameters. © 2020, Editorial Department of Journal of Hunan University. All right reserved.

引用

页码：56 / 67

页数：11

共 19 条

[1]

CAO G Q, ZHANG R., Review on high pressure water jet, Journal of Shenyang Aerospace University, 34, 3, pp. 1-16, (2017)

[2]

CHENG X R, ZHANG S Y, MA L L, Et al., The application status and development prospects of high pressure water jet technology, Hydraulics Pneumatics & Seals, 39, 8, pp. 1-6, (2019)

[3]

LI L Y, HUANG W, WANG R, Et al., Abrasive supplying system of post-mixed abrasive water jet, Mining Technology, 13, 5, pp. 47-48, (2013)

[4]

HUANG W., The application of post mixed abrasive water jet for descaling in steel production, Mining Research and Development, 35, 2, pp. 91-93, (2015)

[5]

MING R, HU D., Study on depth model of post-mixed abrasive jet cutting, Science and Technology Innovation Herald, 12, 35, pp. 141-144, (2015)

[6]

TAZIBT A, PARSY F, ABRIAK N., Theoretical analysis of the particle acceleration process in abrasive water jet cutting, Computational Materials Science, 5, 1, pp. 243-254, (1996)

[7]

JUNKAR M, JURISEVIC B, FAJDIGA M, Et al., Finite element analysis of single-particle impact in abrasive water jet machining, International Journal of Impact Engineering, 32, 7, pp. 1095-1112, (2006)

[8]

YANG X L, ZHANG Z P, CHEN Z, Et al., Study of grid dependency of spray simulation on an asymmetric-nozzle, Journal of Hunan University (Natural Sciences), 43, 8, pp. 8-15, (2016)

[9]

ZHANG C G, ZHANG Y, ZHANG F H, Et al., Development of new entrainment abrasive waterjet system, Journal of Mechanical Engineering, 51, 5, pp. 205-212, (2015)

[10]

JIN X., Experimental study on rock-breaking rules of the after-mix abrasive water jet, Petroleum Tubular Goods & Instruments, 4, 2, pp. 85-88, (2018)

← 1 2 →