A compact meander line uhf rfid antenna for passive tag applications

被引：0

作者：

Bhaskar S. ^{[1
]}

Singh A.K. ^{[2
]}

机构：

[1] Department of Electronics & Telecommunication Engineering, C V Raman Global University, Bhubaneswar

[2] Department of Electronics Engineering, Indian Institute of Technology (BHU), Varanasi

来源：

Progress In Electromagnetics Research M | 2020年 / 99卷

关键词：

Impedance matching (electric) - Spiral antennas - Directional patterns (antenna) - Electromagnetic induction - Mobile antennas - Omnidirectional antennas - Radio frequency identification (RFID);

D O I：

10.2528/pierm20082103

中图分类号：

学科分类号：

摘要：

In this article, a meander line dipole antenna for radio frequency identification (RFID) tag is presented. The loaded meander antenna has a simple meander line structure with a spiral inductor at the end for size miniaturization, a T-match structure, and an inductively coupled parasitic element for impedance matching with the tag IC. The antenna is designed to operate in North American UHF RFID frequency band of 915 MHz. The size of the proposed tag antenna is 50 mm × 12 mm and has good impedance matching with Alien Higgs IC chip of 13.5 − j111Ω at the desired frequency band. The proposed tag antenna provides omnidirectional radiation pattern with a maximum read range of 3.5 m at an effective isotropic radiated power of 4 W. Simulation results are in good agreement with measurement results. © 2020, Electromagnetics Academy. All rights reserved.

引用

页码：57 / 67

页数：10

共 27 条

[1]

Paret D., RFID at Ultra and Super High Frequencies: Theory and Application, (2009)

[2]

Finkenzeller K., RFID Handbook: Radio-Frequency Identification Fundamentals and Applications, (2004)

[3]

Heidrich J., Brenk D., Essel J., Fischer G., Weigel R., Nuremberg E., Schwarzer S., Seemann K., The roots, rules, and rise of RFID, IEEE Microwave Magazine, 11, pp. 78-86, (2010)

[4]

Loo C.-H., Elmahgoub K., Yang F., Elsherbeni A., Kajfez D., Kishk A., Elsherbeni T., Chip impedance matching for UHF RFID tag antenna design, Progress In Electromagnetics Research, 81, pp. 359-370, (2008)

[5]

Cho C., Choo H., Park I., Printed symmetric inverted-F antenna with a quasi-isotropic radiation pattern, Microwave and Optical Technology Letters, 50, pp. 927-930, (2008)

[6]

Goudos S. K., Siakavara K., Theopoulos A., Vatiadis E. E., Sahalos J. N., Application of Gbest-guided artificial bee colony algorithm to passive UHF RFID tag design, International Journal of Microwave and Wireless Technologies, 8, pp. 537-545, (2016)

[7]

Kim K. H., Song J. G., Kim D. H., Hu H. S., Park J. H., Fork-shaped RFID tag antenna mountable on metallic surfaces, Electronics Letters, 43, pp. 1400-1402, (2007)

[8]

Bhaskar S., Singhal S., Singh A. K., Folded-slot active tag antenna for 5.8 GHz RFID applications, Progress In Electromagnetics Research C, 82, pp. 89-97, (2018)

[9]

Bhaskar S., Singh A. K., Linearly tapered meander line cross dipole circularly polarized antenna for UHF RFID tag applications, International Journal of RF and Microwave Computer-aided Engineering, (2018)

[10]

Tran H. H., Ta S. X., Park I., A compact circularly polarized crossed-dipole antenna for an RFID tag, IEEE Antennas and Wireless Propagation Letter, 14, pp. 674-677, (2015)

← 1 2 3 →