Preparation and flame retardant properties of phosphorus-boron hybrid polymer/epoxy resin composites

被引：0

作者：

Cui J. ^{[1
]}

Wang W. ^{[1
]}

Guo Y. ^{[1
]}

Guo J. ^{[1
]}

Li W. ^{[2
]}

Yang B. ^{[1
]}

机构：

[1] Petrochemistry College, Lanzhou University of Technology, Lanzhou

[2] Scisky Chenmical Co., Lanzhou

来源：

Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica | 2019年 / 36卷 / 01期

关键词：

Composite materials; Epoxy resin; Flame retardant performance; Phosphorus boron co-hybrid; Polymer; Thermal properties;

D O I：

10.13801/j.cnki.fhclxb.20180404.001

中图分类号：

学科分类号：

摘要：

A containing phosphorus-boron hybrid polymer (PDCP-DGB) was synthesized by step-reaction polymerization using phenyl dichlorophosphate (PDCP) and boric diglyceride (DGB) as the raw materials. A series of PDCP-DGB/epoxy resin (EP) flame retardant composites were prepared by crosslinking and curing between PDCP-DGB and EP blends. The structure of PDCP-DGB was characterized by FTIR and nuclear magnetic resonance. The PDCP-DGB/EP composites were investigated by gel permeation chromatography (GPC), TG, limit oxygen index (LOI), microscale combustion calorimeter, SEM and XPS. The results indicate that with the increase of mass fraction of PDCP-DGB, the temperature of maximum decomposition rate of PDCP-DGB/EP composite, the residual mass rate and the LOI improve, but the smoke density level, maximum smoke density, peak value of heat release rate (PHRR) and total heat release (THR) decrease. PDCP-DGB is conducive to improve the thermal stability and flame retardant properties of PDCP-DGB/EP composite and has little influence on the mechanical properties of PDCP-DGB/EP composites. When the mass fraction of PDCP-DGB reaches 15wt%, the LOI reaches 28.3%, which is 47.4% higher than that of the pure EP, the vertical burning (UL-94) reaches V-0 level, the THR and PHRR decrease by 28% and 23%, respectively, the residual mass rate increases by 5.11%. SEM images show that the carbon residue surface of PDCP-DGB/EP composites is well improved, which is dense, continuous and smooth. © 2019, Editorial Office of Acta Materiae Compositae Sinica. All right reserved.

引用

页码：28 / 38

页数：10

共 20 条

[1]

Xu M.J., Xu G.R., Leng Y., Et al., Synthesis of a novel flame retardant based on cyclotriphosphazene and DOPO groups and its application in epoxy resins, Polymer Degradation & Stability, 123, pp. 105-114, (2016)

[2]

Tan Y., Shao Z.B., Yu L., Et al., Piperazine-modified ammonium polyphosphate as monocomponent flame-retardant hardener for epoxy resin: Flame retardance, curing behavior and mechanical property, Polymer Chemistry, 7, 17, pp. 3003-3012, (2016)

[3]

Unlu S.M., Dogan S.D., Dogan M., Comparative study of boron compounds and aluminum trihydroxide as flame retardant additives in epoxy resin, Polymers for Advanced Technologies, 25, 8, pp. 769-776, (2014)

[4]

Chen L., Wang Y.Z., Aryl polyphosphonates: Useful halogen-free flame retardants for polymers, Materials, 3, 10, pp. 4746-4760, (2010)

[5]

Vahabi H., Sonnier R., Ferry L., Effects of ageing on the fire behaviour of flame-retarded polymers: A review, Polymer International, 64, 3, pp. 313-328, (2015)

[6]

Wang Q., Zheng G., Ai J.J., Et al., The synthesis of high yield diglycerin borate, Applied Mechanics & Materials, 55-57, pp. 312-316, (2011)

[7]

Plastics: Determination of Burning Behaviour by Oxygen Index Part 2: Guidance: GB/T 2406.2-2009, (2010)

[8]

Plastics: Determination of Burning Characteristics: Horizontal and Vertical Test: GB/T 2408-2008, (2009)

[9]

Test Method for Density of Smoke from the Burning Or Decomposition of Building Materials: GB/T 8627-2007, (2008)

[10]

Test Method for Tensile Properties of Resin Casting Body: GB/T 2568-1995, (1996)

← 1 2 →