A Submicron Unbalance Vibration Targeted Suppression Method for High-end Equipment Based on Self-correcting Coefficient and Fuzzy PID

被引：0

作者：

Xu C. ^{[1
,2
]}

Pan X. ^{[1
,2
]}

Zhang H. ^{[1
,2
]}

Zhang X. ^{[1
,2
]}

机构：

[1] Artificial Self-recovery Research Institute, Beijing University of Chemical Technology, Beijing

[2] Beijing Key Laboratory of Health Monitoring and Self-recovery for High-end Mechanical Equipment, Beijing University of Chemical Technology, Beijing

来源：

Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2023年 / 59卷 / 13期

关键词：

fuzzy PID; self-correcting coefficient; targeted suppression; unbalance vibration;

D O I：

10.3901/JME.2023.13.184

中图分类号：

学科分类号：

摘要：

Unbalance vibration of rotor system is the main reason for the excessive vibration of high-end equipment represented by high-end machine tools and aero-engines. In order to achieve fast, accurate and precise suppression of unbalance vibration of high-end equipment, a targeted suppression method of unbalance vibration based on self-correcting coefficient and fuzzy PID is proposed. This method is based on the electromagnetic automatic balancing actuator, takes the self-correcting coefficient method as the core, and introduces the fuzzy PID algorithm to optimize the number of steps of a single action of the counterweight disc. The simulation results show that the fuzzy PID algorithm realizes the variable step size control of the counterweight disc and reduces the balancing time. Finally, the effectiveness and reliability of the proposed method were verified through the test bench simulation experiment and the machine tool field test. The simulation experiment results show that the proposed method has better control effect and faster balancing speed than the traditional influence coefficient method. The field test results show that balancing system can reduce the unbalance vibration of the machine tool from 5.0 μm to 0.3 μm within 30 s, realize the sub-micron vibration control of high-end equipment, and effectively improve the roundness error of the machined workpiece. © 2023 Editorial Office of Chinese Journal of Mechanical Engineering. All rights reserved.

引用

页码：184 / 192

页数：8

共 19 条

[1]

CAO H R, ZHANG X W, CHEN X F., The concept and progress of intelligent spindles：A review[J], International Journal of Machine Tools and Manufacture, 112, pp. 21-51, (2017)

[2]

PAN X, LU J Q, HUO J J，, Et al., A review on self-recovery regulation (sr) technique for unbalance vibration of high-end equipment[J], Chinese Journal of Mechanical Engineering, 33, 6, pp. 11-33, (2020)

[3]

CHEN Dongju, FAN Jinwei, LI Haiyong, Et al., Relationship between waviness in ultra-precision machining and spindle unbalance[J], Journal of Mechanical Engineering, 49, 1, pp. 191-198, (2013)

[4]

FAN Hongwei, JING Minqing, LIU Heng, Review for studying on active hybrid auto-balancer of grinding wheel and motor spindle[J], Journal of Vibration and Shock, 31, 5, pp. 26-30, (2012)

[5]

ZHANG Yun, MEI Xuesong, Study of online balancing control technique for high-speed spindles[J], Strategic Study of CAE, 15, 1, pp. 87-92, (2013)

[6]

BRECHER C., Machine tool spindle units[J], CIRP Annals - Manufacturing Technology, 59, 2, pp. 781-802, (2010)

[7]

ZHOU Dashuai, WU Liangsheng, The summarize of online balancing machine tool spindle, Modern Manufacturing Engineering, 7, pp. 121-124, (2008)

[8]

ZHANG X N, LIU X, ZHAO H., New active online balancing method for grinding wheel using liquid injection and free dripping[J], Journal of Vibration & Acoustics, 140, 3, pp. 1-12, (2018)

[9]

PAN X, WU H Q, Et al., New liquid transfer active balancing system using compressed air for grinding machine[J], Journal of Vibration & Acoustics, 137, 1, pp. 1-8, (2015)

[10]

PAN X，, HE X T, WU H Q, Et al., Optimal design of novel electromagnetic-ring active balancing actuator with radial excitation[J], Chinese Journal of Mechanical Engineering, 34, 1, pp. 153-166, (2021)

← 1 2 →