Numerical simulations of 3D residual stresses on inclined cruciform welded joints

被引：0
|
作者：
Wei X. [1 ]
Liu M. [1 ]
Xiao L. [1 ]
Zhao J. [1 ]
机构：
[1] Southwest Jiaotong University, Chengdu
来源：
Hanjie Xuebao/Transactions of the China Welding Institution | 2019年 / 40卷 / 05期
关键词：
Full-penetration; Inclined cruciform welded joints; Residual stresses; Temperature field; Thermo-mechanical analysis;
D O I：
10.12073/j.hjxb.2019400126
中图分类号：
学科分类号：
摘要：
To investigate the three dimension distribution of residual stress on full-penetration inclined cruciform welded joints and analyze the influence of the weld form of the cross joint on welding residual stress distribution, numerical simulations of residual stress on full-penetration inclined cruciform welded joints were carried out based on the indirect coupling solving method of temperature field and stress field. Using the FE software ANSYS and choosing typical thermodynamic parameters of Q345 steel, FEM models of full-penetration inclined cruciform welded joints were build. Welding procedure was simulated and temperature fields of full-penetration inclined cruciform welded joints were obtained. The temperature fields taken as input condition, the three-dimensional residual stress fields of full-penetration inclined cruciform welded joints were obtained by using thermo-mechanical analysis in ANSYS. Research results show that the peak residual stresses occurred at the weld toe and the weld root of full-penetration inclined cruciform welded joints and the angle of weld had a significant influence on residual stresses distribution. © 2019, Editorial Board of Transactions of the China Welding Institution, Magazine Agency Welding. All right reserved.
引用
收藏
页码：48 / 53and78
页数：5330
相关论文
共 12 条
  • [1] Wei X., Zou X., Jiang S., Et al., Numerical simulation of residual stress in rib-to-top plate welding of orthotropic steel bridge deck, Bridge Construction, 44, 4, pp. 27-33, (2014)
  • [2] Cao X., Sheng H., Xu Y., Et al., Experimental analysis of residual stress of welded I-section of Q800 high strength steel, Transactions of the China Welding Institution, 39, 3, pp. 36-41, (2018)
  • [3] Ueda Y., Yamakawa T., Analysis of thermal elastic-plastic stress and strain during welding by finite element method, Transactions of the Japan Welding Society, 2, 2, pp. 90-94, (1971)
  • [4] Han T., Zhang H., Wu Q., Et al., Numerical simulation of 80℃ temperature field distribution of thick plate multi-pass welding with SYSWELD, China Welding, 27, 1, pp. 20-25, (2018)
  • [5] Barsoum Z., Barsoum I., Residual stress effects on fatigue life of welded structures using LEFM, Engineering Failure Analysis, 16, pp. 449-467, (2009)
  • [6] Barsoum Z., Residual stress analysis and fatigue assessment of welded steel structures, (2008)
  • [7] Gong Q., Hu G., Miao Y., Et al., Numerical analysis of residual stress in multi-layer multi-pass welding modeled by layer-by-layer filler, Transactions of the China Welding Institution, 39, 2, pp. 16-20, (2018)
  • [8] Cui C., Bu Y., Li J., Et al., Distribution characteristics of welding residual stress at U Deck-to-Rib connection detail of steel box girder, Journal of Southwest Jiaotong University, 53, 2, pp. 260-265, (2018)
  • [9] Shu G., Chen Y., Zhang M., Et al., Experimental study on residual stress and distribution model in welded π-shaped sections, Journal of Southeast University (Natural Science Edition), 47, 3, pp. 559-564, (2017)
  • [10] Yi M.S., Hyun C.M., Paik J.K., Three-dimensional thermo-elastic-plastic finite element method modeling for predicting weld-induced residual stresses and distortions in steel stiffened-plate structures, World Journal of Engineering and Technology, 6, 1, pp. 176-200, (2018)
12