Stress Cycle Behaviors of Planetary Roller Screw Mechanism Based on Kinematic Analysis

被引：1
|
作者：
Yao Q. [1 ,2 ]
Liu Y. [2 ]
Ma S. [3 ]
Zhang M. [4 ,5 ]
机构：
[1] School of Mechanical Engineering, Suzhou University of Science and Technology, Suzhou
[2] School of Mechanics, Civil Engineering and Architecture, Northwestern Polytechnical University, Xi'an
[3] Shaanxi Engineering Laboratory for Transmissions and Controls, Northwestern Polytechnical University, Xi'an
[4] School of Civil Aviation, Northwestern Polytechnical University, Xi'an
[5] Yangtze River Delta Research Institute of NPU, Taicang
来源：
Huanan Ligong Daxue Xuebao/Journal of South China University of Technology (Natural Science) | 2021年 / 49卷 / 09期
基金：
中国国家自然科学基金;
关键词：
Kinematic analysis; Planetary roller screw mechanism; Space helical surface; Stress cycle;
D O I：
10.12141/j.issn.1000-565X.210291
中图分类号：
学科分类号：
摘要：
The movement and force transmission of planetary roller screw mechanism (PRSM) are realized by the planetary motion of multiple rollers and the meshing of their helical surfaces between the screw and the nut. Based on the characteristics of spatial helical surface of screw, nut and roller, the kinematic analysis model of PRSM is established by using the parametric equations of the screw, nut and roller in this paper. The positions of contact points are obtained according to the principle of continuous tangency. Then, the relationship between the structural parameters of PRSM is deduced from the kinematics characteristics of the contact points. On this basis, the spatial motion trajectories of the screw, nut and roller are simulated, and the stress cycle behaviors on their threads are further obtained. Furthermore, the working life of the PRSM is predicted. The results show that there is a relative velocity at the contact point of the screw and roller, and the contact point of the nut and roller is the instantaneous center; and that each specific contact point on the roller and nut bears stable pulsating cyclic contact stress, while each specific contact point on the screw is subjected to cyclic contact stress with periodic amplitude variation. © 2021, Editorial Department, Journal of South China University of Technology. All right reserved.
引用
收藏
页码：135 / 144
页数：9
相关论文
共 20 条
  • [1] VANTHUYNE T., An electrical thrust vector control system for the VEGA launcher [C], Proceedings of the 13th European Space Mechanisms and Tribology Symposium, pp. 1-7, (2009)
  • [2] QIAO G, LIU G, SHI Z, Et al., A review of electromechanical actuators for more/all electric aircraft systems [J], Proceedings of the Institution of Mechanical Engineers, Part C:Journal of Mechanical Engineering Science, 232, 22, pp. 4128-4151, (2017)
  • [3] BRANDENBURG G, BRUCKL S, DORMANN J, Et al., Comparative investigation of rotary and linear motor feed drive systems for high precision machine tools [C], Proceedings of International Workshop on Advanced Motion Control, pp. 384-389, (2000)
  • [4] SASAKI Y, CHIKAZAWA G, NOGAWA M, Et al., Ex vivo evaluation of a roller screw linear muscle actuator for an implantable ventricular assist device using trained and untrained latissimus dorsi muscles [J], Artif Organs, 23, pp. 262-267, (1999)
  • [5] XIE Zhijie, ZHANG Chuanwei, XUE Qihe, Et al., Analysis of dynamic friction torque and transmission efficiency of planetary roller screw, Tribology, 39, 4, pp. 489-496, (2019)
  • [6] MA S, WU L, FU X, Et al., Modelling of static contact with friction of threaded surfaces in a planetary roller screw mechanism [J], Mechanism and Machine Theory, 139, pp. 212-236, (2019)
  • [7] FU X, LIU G, MA S, Et al., An efficient method for the dynamic analysis of planetary roller screw mechanism [J], Mechanism and Machine Theory, 150, pp. 1-15, (2020)
  • [8] YIN Guofu, SONG Yanxuan, YIN Ming, Et al., Load distribution and life prediction of inverted planetary roller screw, Advanced Engineering Sciences, 51, 1, pp. 222-228, (2019)
  • [9] JIN Qianzhong, YANG Jiajun, Motion characteristics and parameter choosing of planetary roller screw, Manufacturing Technology & Machine Tool, 5, pp. 13-15, (1998)
  • [10] HOJJAT Y, AGHELI M M., A comprehensive study on capabilities and limitations of roller-screw with emphasis on slip tendency [J], Mechanism and Machine Theory, 44, 10, pp. 1887-1899, (2009)
12