Development of CuO nanoparticles modified electrochemical sensor for detection of salbutamol

Metal oxide structures are being utilized in an increasing variety of applications. This study used cyclic and differential pulse voltammetry techniques to investigate the possible utilization of copper oxide (CuO) nanoparticles modified carbon paste electrode (CPE) for the redox reactions of salbutamol (SAL). The electrochemical performance of the SAL analyte in a complex matrix environment in Ventolin was evaluated in order to assess the appropriateness of the proposed sensor in a real sample environment. CuO nanoparticles were produced via a straightforward, cost-effective and efficient sol-gel method, and characterization studies of synthesized CuO nanoparticles were performed by scanning electron microscopy, x-ray Diffraction (XRD), and x-ray photoelectron spectroscopy. The synthesized CuO nanoparticles had a spherical shape and particle size was found to be 74 nm. The crystal size of the CuO particles was calculated to be 21.79 nm using the Debye-Scherrer equation. Under optimal conditions, differential pulse voltammetry demonstrated a linear response in the 50 nM to 100 mu M range, with a salbutamol detection limit of 50 nM (S/N = 3). The SAL concentration (R 2 = 0.9971) was found to have a good correlation coefficient. The reproducibility of the biosensor was investigated and evaluated with a relative standard deviation of 3% (n = 8). The storage stability of CuO modified CPE for two weeks was evaluated based on the response of DP current measured at intervals every two days. According to the measurement results, the modified electrode exhibited good stability and reproducibility while maintaining 80% of its stability. It is also a rapid and dependable sensor candidate with a measurement time of approximately 20 s. The developed electrode has been utilized successfully to determine doping material with improved performance.