Novel partial discharge location in cast resin transformer using UHF method with scanning x-ray irradiation

被引：0

作者：

Fujimura T. ^{[1
]}

Kozako M. ^{[1
]}

Hikita M. ^{[1
]}

Iida K. ^{[2
]}

Umemura T. ^{[2
]}

Nakamura Y. ^{[3
]}

Nakamae T. ^{[4
]}

Maeda T. ^{[4
]}

Higashiyama M. ^{[4
]}

机构：

[1] Kyushu Institute of Technology, 1-1, Sensui-cho, Tobata-ku, Kitakyushu

[2] Mie University, 1577 Kurimamachiya-cho, Tsu

[3] Toshiba Infrastructure Systems & Solutions Corporation, 1, Toshiba-cho, Fuchu

[4] TOSHIBA Industrial Products and Systems Co., Ltd., 2121 Nao, Asahi-cho, Mie-gun, Mie

来源：

IEEJ Transactions on Fundamentals and Materials | 2020年 / 140卷 / 03期

关键词：

Cast resin transformer; Partial discharge; UHF method; X-ray irradiation;

D O I：

10.1541/ieejfms.140.162

中图分类号：

学科分类号：

摘要：

It is crucial to detect void and delamination which might exist in cast resin transformer, because these defects can reduce insulation performance of cast resin equipment. It is considered that detecting partial discharge (PD) is effective to diagnose equipment of power equipment. This paper presents novel PD location using X-ray irradiation and UHF method in actual 6.6 kV class cast resin transformer VT as well as sample simulating the defect. By scanning a copper plate installed in front of a X ray generator to limit the X-ray irradiation range, the defect position was successfully determined with 10 mm accuracy. it was also shown that PD source in a larger size 33 kV class VT can be located by the time of flight of the electromagnetic wave detection signal by UHF method. © 2020 Institute of Electrical Engineers of Japan. All rights reserved.

引用

页码：162 / 168

页数：6

共 13 条

[11]

Chen M.-K., Chen J.-M., Cheng C.-Y., Partial discharge detection in 11.4 kv cast resin power transformer, IEEE Trans. Dielectr. & Electr. Insul., 23, 4, pp. 2223-2231, (2016)

[12]

Hikita M., Kozako M., Takada H., Hayashi M., Higashiyama M., Hirose T., Nakamura Y., Nakamura S., Umemura T., X-ray irradiation induced discharge of spherical void in epoxy resin, 2011 Electrical Insulation Conference, pp. 463-467, (2011)

[13]

Kundu P., Et al., A non-interative partial discharge source location method for transformers employing acoustic emission techniques, Appl. Acoustics, 70, pp. 1378-1383, (2009)

← 1 2 →