Classification method of coal and rock drillability based on Mechanical Specific Energy theory

被引：0
|
作者：
Xie Z. [1 ,2 ]
Chang X. [1 ,2 ]
Yang L. [2 ,4 ]
Pi Y. [2 ,3 ]
机构：
[1] School of Mechanical Engineering, Chongqing University, Chongqing
[2] State Key Laboratory of Mechanical Transmission, Chongqing University, Chongqing
[3] School of Automotive Engineering, Chongqing University, Chongqing
[4] Chongqing Research Institute Co. Ltd., China Coal Technology and Engineering Group Corp., Chongqing
来源：
Meitiandizhi Yu Kantan/Coal Geology and Exploration | 2021年 / 49卷 / 03期
关键词：
Coal mine drilling rig; Drillability; Extreme learning machine (ELM); Mechanical Specific Energy (MSE); PDC drill bit;
D O I：
10.3969/j.issn.1001-1986.2021.03.030
中图分类号：
学科分类号：
摘要：
The drillability classification of the surrounding rock during the drilling process of coal mine gas drainage through the Mechanical Specific Energy(MSE) can provide a basis for the drilling rig to adjust the drilling parameters. Aiming at the problems of difficulty and low efficiency of manual layer identification in the process of gas drainage and drilling, a coal and rock drillability classification method based on MSE as the drillability evaluation index combined with Extreme Learning Machine(ELM) is proposed. A simulation model of PDC bit crushing rock was established by ABAQUS, and the changing law of drilling speed and MSE in the process of PDC bit crushing rock was studied from three aspects: material type, rotation speed and drilling pressure. At the same time, training data including drilling parameters and MSE were obtained. The ELM is used to learn the data such as drilling parameters and MSE. Finally, the classification accuracy under the two drillability classification indicators is compared. The results show that the accuracy rate of classification when the MSE is used as the index of drillability is over 90%, which is higher than the drilling parameters. The classification results can provide a theoretical basis for drilling rigs to adjust drilling parameters and realize adaptive drilling. © 2021 Meitiandizhi Yu Kantan/Coal Geology and Exploration. All rights reserved
引用
收藏
页码：236 / 243
页数：7
相关论文
共 24 条
  • [1] YAO Ke, TIAN Hongliang, YAO Ningping, Et al., Present situation and prospect of drilling equipment technology in coal mine[J], Coal Geology & Exploration, 47, 1, pp. 1-5, (2019)
  • [2] YAO Ningping, SUN Rongjun, YE Genfei, Equipment and technology of borehole construction for gas drainage in China underground mines[J], Coal Science and Technology, 36, 3, pp. 12-16, (2008)
  • [3] Lin YANG, Research status and key technology of underground gas drainage drilling robot in coal mine[J], Coal Mine Machinery, 39, 8, pp. 60-62, (2018)
  • [4] WANG Qingfeng, CHEN Hang, Development and prospect on intelligent drilling technology and equipment for gas drainage[J], Industry and Mine Automation, 44, 11, pp. 18-24, (2018)
  • [5] PENG S S, SASAOKA T, DAVID X T, Et al., Mine roof geology information system[J], Coal Age, 110, 5, pp. 44-49, (2005)
  • [6] LIU Shaowei, FENG Youliang, LIU Dongliang, Numerical experiments of dynamic response characteristics of rock drilling on stratified roof in coal roadway[J], Chinese Journal of Rock Mechanics and Engineering, 33, pp. 3170-3176, (2014)
  • [7] LI Xintao, Study on the roof drilling characteristics experiment of anchorage hole in coal roadway, (2015)
  • [8] ZHANG Youzhen, ZHANG Ning, SHAO Junjie, Et al., Fuzzy identification of coal-bearing strata lithology based on drilling parameter clustering[J], Journal of China Coal Society, 44, 8, pp. 2328-2335, (2019)
  • [9] YUE Z Q, LEE C F, LAW K T, Et al., Automatic monitoring of rotary-percussive drilling for ground characterization: Illustrated by a case example in Hong Kong, International Journal of Rock Mechanics & Mining Sciences, 41, 4, pp. 573-612, (2004)
  • [10] LI Changsheng, ZHAO Jinhai, YANG Chuanshu, Et al., Novel approach for assessing real-time bit working efficiency[J], Oil Drilling & Production Technology, 34, 6, pp. 1-4, (2012)
123