A review on chatter stability in thin-wall milling

被引：0
作者：
Lu X. [1 ]
Yang K. [1 ]
Luan Y. [1 ]
Hou P. [1 ]
Gu H. [1 ]
机构：
[1] Key Laboratory for Precision and Non-Traditional Machining of the Ministry of Education, Dalian University of Technology, Dalian
来源：
Zhendong yu Chongji/Journal of Vibration and Shock | 2021年 / 40卷 / 08期
关键词：
Chatter; Milling; Stability analysis; Thin wall;
D O I：
10.13465/j.cnki.jvs.2021.08.007
中图分类号：
学科分类号：
摘要：
Aiming at the chatter problems in thin-wall milling, the research progress of regenerative chatter theoretical models of thin-wall milling was discussed firstly in this work. Then, the milling force model, which is the root of the chatter, was discussed in depth, and the advantages and disadvantages of empirical models, finite element models, and analytical models of milling force were comparatively analyzed. Afterwards, the dynamic characteristics of thin-wall milling systems were discussed in detail. The methods of calculating the frequency response function of the tool tip were divided into experimental method, finite element method, and analytical method. The principles, research status, advantages, and disadvantages of these methods were discussed. Frequency-domain methods and time-domain methods for solving stability problems were comparatively analyzed. Related research on chatter stability of micro-milling meso-scale thin-wall was discussed. Finally, the research status and future directions of chatter stability of milling thin-walled parts were summarized and explored. © 2021, Editorial Office of Journal of Vibration and Shock. All right reserved.
引用
收藏
页码：50 / 61and69
页数：6119
相关论文
共 144 条
[1]  
JIANG Yuping, LONG Xinhua, MENG Guang, Stability analysis for thin-walled milling processes, Journal of Vibration and Shock, 35, 2, pp. 45-50, (2016)
[2]  
JIN X, SUN Y W, GUO Q, Et al., 3D stability lobe considering the helix angle effect in thin-wall milling, International Journal of Advanced Manufacturing Technology, 82, 9, pp. 2123-2136, (2016)
[3]  
BUDAK E., Mechanics and dynamics of milling thin walled structures, (1994)
[4]  
LAPUJOLADE F, MABROUKI T, RAISSI K., Prédiction du comportement vibratoire du fraisage latéral de finition des pièces à parois minces, Mecanique et Industries, 3, 4, pp. 403-418, (2002)
[5]  
THEVENOT V, ARNAUD L, DESSEIN G, Et al., Influence of material removal on the dynamic behavior of thin-walled structures in peripheral milling, Machining Science and Technology, 10, 3, pp. 275-287, (2006)
[6]  
THEVENOT V, ARNAUD L, DESSEIN G, Et al., Integration of dynamic behavior variations in the stability lobes method: 3D lobes construction and application to thin-walled structure milling, International Journal of Advanced Manufacturing Technology, 27, 7, pp. 638-644, (2006)
[7]  
LI Z Y, SUN Y N, GUO D M., Chatter prediction utilizing stability lobes with process damping in finish milling of titanium alloy thin-walled workpiece, International Journal of Advanced Manufacturing Technology, 89, 9, pp. 2663-2674, (2017)
[8]  
ZHANG Xuewei, YU Tianbiao, WANG Wanshan, Modeling and analysis for 3D chatter stability of thin-walled parts in milling process, Journal of Northeastern University(Natural Science), 36, 1, pp. 99-103, (2015)
[9]  
SEGUY S, DESSEIN G, ARNAUD L., Surface roughness variation of thin wall milling, related to modal interactions, International Journal of Machine Tools and Manufacture, 48, 3, pp. 261-274, (2008)
[10]  
GE Maojie, SHAN Guofeng, YU Jian, Et al., Experimental research on milling force model of titanium alloy thin wall workpiece, Tool Engineering, 49, 10, pp. 44-47, (2015)
12345678910