Effect of antioxidant/light stabilizer on properties of 3D printed photochromic wood-plastic composites

被引：0

作者：

Yang H. ^{[1
]}

Guo R. ^{[1
]}

Ren Z. ^{[1
]}

Xu M. ^{[1
]}

机构：

[1] Key Laboratory of Bio-based Material Science and Technology of Ministry of Education, Northeast Forestry University, Harbin

来源：

Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica | 2021年 / 38卷 / 03期

关键词：

Antioxidant; Fusion deposition technology (FDM); Light stabilizer; Mechanical properties; Photofatigue-resist; Wood-plastic composites;

D O I：

10.13801/j.cnki.fhclxb.20200617.002

中图分类号：

学科分类号：

摘要：

Functional photochromic wood-plastic composites (PWPC) have great application potential in interior decoration and other fields. However, the lifespan of PWPC is usually short. In this paper, antioxidant 1010 and light stabilizer 770 were introduced into PWPC to improve the mechanical properties and photofatigue-resist of composites. The wood flour/polylactic acid (WF/PLA) based photochromic composites were prepared via melt blending and printed by fusion deposition technology (FDM). The mechanical properties, interfacial compatibility, thermal stability, and photofatigue-resist of WF/PLA composite were then characterized. The results show that when antioxidant 1010 is added alone, compared with WF/PLA composite, the tensile, flexural and impact strength of composite increased by 42.58%, 23.25% and 6.52%, respectively. However, adding light stabilizer 770 alone, the tensile and flexural strength increase while the impact strength decreases. When antioxidant 1010 and light stabilizer 770 are added to WF/PLA composite at mass ratio of 1:1, the tensile strength of composite increased by 1.8% under the synergistic effect of these two additives, the bending and impact strength decreased by 9.3% and 22.1%, respectively. Compared with other combinational systems, the decrease in mechanical properties is the lowest. In addition, WF/PLA composite with mass ratio antioxidant 1010 to light stabilizer 770 of 1:1 has better thermal degradation properties and photofatigue-resist than WF/PLA composite. The temperature at mass loss of 5% is 219.84℃. On the 10th day of aging, the surface color difference ΔE of WF/PLA composite increased from 5.3 to 6.7, increase of 26.7%. Copyright ©2021 Acta Materiae Compositae Sinica. All rights reserved.

引用

页码：761 / 769

页数：8

共 29 条

[1]

NGO T D, KASHANI A, IMBALZANO G, Et al., Additive manufacturing (3D printing): A review of materials, methods, applications and challenges, Composites Part B: Engineering, 143, pp. 172-196, (2018)

[2]

KUN K., Reconstruction and development of a 3D printer using FDM technology, Procedia Engineering, 149, pp. 203-211, (2016)

[3]

MEI F., The latest application of 3D printing technology, World Manufacturing Technology and Equipment Market, 4, (2019)

[4]

ZHANG W J, FANG H, YUAN Z L, Et al., Optimization design and precision analysis of desktop FDM 3D printing equipment, Machinery, 45, 1, pp. 5-10, (2018)

[5]

BI H J, REN Z C, GUO R, Et al., Fabrication of flexible wood flour/thermoplastic polyurethane elastomer composites using fused deposition molding, Industrial Crops & Products, 122, pp. 76-84, (2018)

[6]

BI H J, XU M, YE G Y, Et al., Mechanical, thermal, and shape memory properties of three-dimensional printing biomass composites, Polymers, 10, 11, (2018)

[7]

WANG X, WANG Y L, WANG N N, Et al., Research on 3D printing technology of flexible materials based on FDM, Mechanical Engineering and Automation, 1, pp. 1-3, (2020)

[8]

YANG Z Z., Study of poplar powder/PLA composites and its application in 3D printing, (2018)

[9]

GUO R, REN Z C, BI H J, Et al., Effect of toughening agents on the properties of poplar wood flour/poly(lactic acid) composites fabricated with fused deposition modeling, European Polymer Journal, 107, pp. 34-45, (2018)

[10]

TAO Y B, WANG H L, LI Z L, Et al., Development and application of wood flour-filled polylactic acid composite filament for 3D printing, Materials, 10, 4, (2017)

← 1 2 3 →