Mechanical Properties and Deformation Behavior of Metal Injection Molded Products with Cellulose Nanofiber

被引：0

作者：

Osada T. ^{[1
]}

Kobayashi S. ^{[1
]}

机构：

[1] Dept. Mechanical System Engineering, Tokyo Metropolitan University, 1-1 Minami-Osawa, Hachioji

来源：

Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy | 2023年 / 70卷 / 03期

关键词：

carbon contents; cellulose nanofiber; deformation; mechanical properties; metal injection molding;

D O I：

10.2497/jjspm.70.168

中图分类号：

学科分类号：

摘要：

Metal Injection Molding (MIM) process is suitable for fabricating small and complex shaped metal parts with high production volume. In this study, in order to improve the MIM process, cellulose nanofibers (CNF) were focused. There are problems such as deformation during debinding and sintering due to the addition of a large amount of binder. On the other hand, the strength of the green compact decreased with decreasing binder contents. In this study, cellulose nanofibers were added with a binder during mixing in order to improve the handling of green compacts, and decrease the deformation during debinding and sintering. The effects of CNF contents on the mechanical properties were investigated. It was clarified that CNF is effective in improving the handleability of the debound compacts and suppressing deformation during sintering. ©2023 Japan Society of Powder and Powder Metallurgy.

引用

页码：168 / 172

页数：4

共 5 条

[1]

Osada T., Sakurai R., Hashikawa R., Tsumori F., Miura H., Toda K., J. Jpn. Soc. Powder Powder Metallurgy, 62, pp. 108-113, (2015)

[2]

Goi Y., The Micromeritics, 62, pp. 39-43, (2019)

[3]

Deng T., Wang Y., Dufuresne A., Lin N., Carbohydrate Polymers, 181, pp. 111-181, (2018)

[4]

Zhao X., Yan B., Liu H., Deng T., Ceramics International, 45, pp. 14098-14104, (2019)

[5]

Kurita H., Kanno T., Narita F., J. Soc. Materials Sci. Jpn, 71, pp. 411-423, (2022)

← 1 →