Additive manufacturing in construction: A review on technologies, processes, materials, and their applications of 3D and 4D printing

被引：3

作者：

Pacillo G.A. ^{[1
]}

Ranocchiai G. ^{[1
]}

Loccarini F. ^{[1
]}

Fagone M. ^{[1
]}

机构：

[1] Department of Civil and Environmental Engineering, University of Florence, Florence

来源：

Material Design and Processing Communications | 2021年 / 3卷 / 05期

关键词：

3D printing; additive construction; additive manufacturing; construction process; digitalization;

D O I：

10.1002/mdp2.253

中图分类号：

学科分类号：

摘要：

In this paper, the current state of the art of additive manufacturing (AM) in the construction industry to manufacture on large scales is reviewed. The central concept of AM was defined, and it has been highlighted in the large use in several sectors. The main advantages that AM offers in the construction industry were described with at the same time the most important challenges that need to be addressed for real use. The main AM technologies solutions on large scales were described from more compact solutions like gantry technology to more flexible and free technology solutions. The choice of an AM solution rather than another is closely linked to the materials to be used and the building component to be built. Regarding materials, the research focused on materials based on aggregates, metals, and polymers. The application of AM in the construction field requires more studies and further research. © 2021 The Authors. Material Design & Processing Communications published by John Wiley & Sons Ltd.

引用

共 47 条

[1]

ASTM 52900:2017 [Internet], (2020)

[2]

Tay Y.W.D., Panda B., Paul S.C., Noor Mohamed N.A., Tan M.J., Leong K.F., 3D printing trends in building and construction industry: a review [Internet]. Vol. 12, Virtual and Physical Prototyping. Taylor and Francis Ltd., (2017)

[3]

Gibson I., Rosen D.W., Stucker B., Additive manufacturing technologies: rapid prototyping to direct digital manufacturing, pp. 1-459, (2010)

[4]

Labonnote N., Ronnquist A., Manum B., Ruther P., Additive construction: state-of-the-art, challenges and opportunities, Autom Constr, 72, pp. 347-366, (2016)

[5]

Benedetti M., du Plessis A., Ritchie R.O., Dallago M., Razavi S.M.J., Berto F., Architected cellular materials: A review on their mechanical properties towards fatigue-tolerant design and fabrication, Mater Sci Eng R Rep, 144, pp. 1-20, (2021)

[6]

Lowke D., Dini E., Perrot A., Weger D., Gehlen C., Dillenburger B., Particle-bed 3D printing in concrete construction—possibilities and challenges, Cem Concr Res, 112, pp. 50-65, (2018)

[7]

Delgado Camacho D., Clayton P., O'Brien W.J., Et al., Applications of additive manufacturing in the construction industry—a forward-looking review, Autom Constr., 89, pp. 110-119, (2018)

[8]

Bosscher P., Williams R.L., Bryson L.S., Castro-Lacouture D., Cable-suspended robotic contour crafting system, Autom Constr., 17, 1, pp. 45-55, (2007)

[9]

Khoshnevis B., Automated construction by contour crafting—related robotics and information technologies, Autom Constr, 13, 1, pp. 5-19, (2004)

[10]

Nerella V.N., Nather M., Krause M., Schach R., CONPrint3D: Beton-3D-druck als ersatz für den mauerwerksbau/CONPrint3D: 3D-concrete-printing as an alternative for masonry, Bauingenieur, 92, 9, pp. 355-363, (2017)

← 1 2 3 4 5 →