Design of additively manufactured methanol conversion reactor for high throughput production

被引：1
|
作者：
Li D. [1 ]
Maloney T. [2 ]
Mannan N. [2 ]
Niknam S. [3 ]
机构：
[1] Advanced Manufacturing LLC, East Hartford, CT
[2] Connecticut Center of Advanced Technology, East Hartford, CT
[3] Department of Mechanical Engineering, Western New England University, Springfield, MA
来源：
Material Design and Processing Communications | 2021年 / 3卷 / 01期
关键词：
additive manufacturing; carbon hydrogenation; design; processing optimization; reactor;
D O I：
10.1002/mdp2.143
中图分类号：
学科分类号：
摘要：
Additively manufactured methanol conversion reactor was designed and fabricated for high throughput fuel production while capturing carbon dioxide. The reactor designed is part of large effort in integrating electrolyzer and catalytic reactor system. Processing in fabricating the steel, titanium, and nickel alloy reactors were optimized to improve the catalyst deposition process and reaction efficiency. Microstructure of the additively manufactured reactors were characterized. General design is utilized to improve the performance of the reactor while exploring the benefit of freeform in additive manufacturing. © 2020 John Wiley & Sons, Ltd.
引用
收藏
相关论文
共 50 条
  • [1] Coolant Channel Design for Additively Manufactured Reactor Cores
    Weinmeister, Justin
    Jesse, Casey J.
    Jain, Prashant
    Ade, Brian J.
    Schappel, Danny
    NUCLEAR SCIENCE AND ENGINEERING, 2022, 196 (12) : 1496 - 1516
  • [2] Design and Implementation of an Additively Manufactured Reactor Concept for the Catalytic Methanation
    Hauser, Alexander
    Neubert, Michael
    Feldner, Alexander
    Horn, Alexander
    Grimm, Fabian
    Karl, Juergen
    APPLIED SCIENCES-BASEL, 2022, 12 (18):
  • [3] Reactor physics phenomena in additively manufactured control elements for the High Flux Isotope Reactor
    Burns, Joseph R.
    Petrovic, Bojan
    Chandler, David
    Terrani, Kurt A.
    ANNALS OF NUCLEAR ENERGY, 2018, 115 : 403 - 414
  • [4] High-throughput experimentation for microstructural design in additively manufactured 316L stainless steel
    Agrawal, Ankur Kumar
    de Bellefon, Gabriel Meric
    Thoma, Dan
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 793
  • [5] High-throughput ion irradiation of additively manufactured compositionally complex alloys
    Moorehead, Michael
    Nelaturu, Phalgun
    Elbakhshwan, Mohamed
    Parkin, Calvin
    Zhang, Chuan
    Sridharan, Kumar
    Thoma, Dan J.
    Couet, Adrien
    JOURNAL OF NUCLEAR MATERIALS, 2021, 547
  • [6] High-throughput stochastic tensile performance of additively manufactured stainless steel
    Salzbrenner, Bradley C.
    Rodelas, Jeffrey M.
    Madison, Jonathan D.
    Jared, Bradley H.
    Swiler, Laura P.
    Shen, Yu-Lin
    Boyce, Brad L.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2017, 241 : 1 - 12
  • [7] Design of Additively Manufactured Lattice Structures for Tissue Regeneration
    Lanzotti, Antonio
    Martorelli, Massimo
    Russo, Teresa
    Gloria, Antonio
    THERMEC 2018: 10TH INTERNATIONAL CONFERENCE ON PROCESSING AND MANUFACTURING OF ADVANCED MATERIALS, 2018, 941 : 2154 - 2159
  • [8] Design and performance of an additively manufactured high-Si transformer core
    Plotkowski, A.
    Carver, K.
    List, F.
    Pries, J.
    Li, Z.
    Rossy, A. Marques
    Leonard, D.
    MATERIALS & DESIGN, 2020, 194 (194)
  • [9] Simulation-Driven Design of an Additively Manufactured Reactor for Exothermic Liquid-Liquid Reactions
    Jastram, Alexander
    Schaack, Senada
    Kiener, Christoph
    CHEMIE INGENIEUR TECHNIK, 2022, 94 (07) : 948 - 957
  • [10] High throughput determination of creep behavior of additively manufactured AlSi10Mg alloy
    Singh, Shobhit Pratap
    Jayaram, Vikram
    Srinivasan, Dheepa
    Kumar, Praveen
    ADDITIVE MANUFACTURING, 2022, 58
12345