Research on Coil Self-positioning Method for Inductive Wireless Power Supply System

被引：0

作者：

Li Y. ^{[1
]}

Jiang X. ^{[1
]}

Ying Y. ^{[1
]}

Xie K. ^{[1
]}

机构：

[1] School of Electrical Engineering, Southwest Jiaotong University, Sichuan Province, Chengdu

来源：

Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering | 2023年 / 43卷 / 11期

基金：

中国国家自然科学基金;

关键词：

coil positioning; implantable medical device; inductive wireless power supply; mutual inductance identification; position disturbance;

D O I：

10.13334/j.0258-8013.pcsee.213373

中图分类号：

学科分类号：

摘要：

Inductive wireless power supply technology is one of the effective ways to solve the flexible power consumption of mobile devices, such as implantable medical device. However, in practical application, the transmitting and receiving coils are usually difficult to be aligned accurately, which will cause the adverse effects to the system operation, such as the decrease of transmission power and efficiency. Therefore, a self-positioning method based on the parameter identification of mutual inductance is proposed for inductive wireless power supply system. This method can provide the accurate orientation of transmitting coil without the additional auxiliary coils or position sensors. The analytical formula for describing the relationship of mutual inductance and coil position is first deduced, and then the changes of mutual inductance under the position disturbance are combined to solve the three-dimensional coordinates of the transmitting coil. Therefore, the autonomous positioning of an inductive wireless power supply system can be achieved. Finally, an inductive wireless power supply system with S-S topology is built to verify the proposed method in experiment. The experimental results show that it can realize the effective and accurate positioning between the transmitting coil and receiving coil, and the positioning accuracy is within 1mm, which meets the requirements of practical application. ©2023 Chin.Soc.for Elec.Eng.

引用

页码：4367 / 4376

页数：9

共 21 条

[1]

JIANG Jinzhou, CHEN Yueming, YE Jilun, Review on the development of cardiac pacemaker technology [J], China Medical Devices, 34, 3, pp. 160-163, (2019)

[2]

WIENEKE H, RICKERS S, VELLEUER J, Leadless pacing using induction technology：impact of pulse shape and geometric factors on pacing efficiency[J], EP Europace, 15, 3, pp. 453-459, (2013)

[3]

WIENEKE H, KONORZA T, ERBEL R, Leadless pacing of the heart using induction technology ： a feasibility study[J], Pacing and Clinical Electrophysiology, 32, 2, pp. 177-183, (2009)

[4]

LIU Xuyang, LIU Chunhua, PONG W T P, TMR-sensor-array-based misalignment-tolerant wireless charging technique for roadway electric vehicles [J], IEEE Transactions on Magnetics, 55, 7, pp. 1-7, (2019)

[5]

Wei HAN, CHAU K T, JIANG Chaoqiang, Accurate position detection in wireless power transfer using magnetoresistive sensors for implant applications[J], IEEE Transactions on Magnetics, 54, 11, (2018)

[6]

HUANG C C, Chunliang LIN, KAO Jiajing, Vehicle parking guidance for wireless charge using GMR sensors [J], IEEE Transactions on Vehicular Technology, 67, 8, pp. 6882-6894, (2018)

[7]

SHIN Y, HWANG K, PARK J, Precise vehicle location detection method using a wireless power transfer (WPT) system[J], IEEE Transactions on Vehicular Technology, 68, 2, pp. 1167-1177, (2019)

[8]

LOEWEL T, NOACK F．, Identification and positioning system for inductive charging systems[C], 2013 3rd International Electric Drives Production Conference (EDPC), (2013)

[9]

SUZUKI M, OTA S, IKEDA R, Internal defect position evaluation of the ground coil by detecting the electromagnetic waves from the partial discharge[C], Proceedings of 2011 International Symposium on Electrical Insulating Materials, (2011)

[10]

BABU A, GEORGE B．, Sensor system to aid the vehicle alignment for inductive EV chargers[J], IEEE Transactions on Industrial Electronics, 66, 9, pp. 7338-7346, (2019)

← 1 2 3 →